Unconfigured Ad Widget

Collapse

PTR-91 ejection problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    97F1504RAD
    Calguns Addict
    • Dec 2008
    • 6319

    Originally posted by fcastle
    I've used the following:

    MagTech (brand new); stops working after 10-15 rounds
    Winchester; stops working after 10-15 rounds
    Federal; works pretty well
    American Tactical Imports 7.62x51: stopped after 8 rounds

    Mind you, I have to clean the hell out of the chamber before switching ammunition.

    At this point, I am beyond frustrated. PTR doesn't seem to think that this is a problem.

    So, yes, I can get a brand new barrel with the correct specifications and cut it down, get it installed, etc., but why should I have to do that, when in fact, it's PTR's (vendor's) fault? A new barrel is ~$200, then to get it installed is anywhere between $250-450 depending on who gets to work on it, as well as possibly having to get a new cocking tube, forearm, etc., we're talking over $700.

    Now I ask you- is this fair?
    You need to use American Eagle and/or Remington UMC myabe even some WOLF as I hear it works well, and then see if those ammos work. The list you gave has one of the ammos they suggest NOT using whihc is the Winchester. If those give you trouble then call PTR and tell them it won't eat those and send the rifle back.

    Originally posted by high_revs
    I have a PTR-91F (18" barrel). The only problems I had was that it was ejecting hard. It was putting dents on the brass. Granted, I was using .308 loads (loads I put together learning to reload). It's only 147gr bullet too. I only took a few shots but will try my PRV Partizan, maybe the blackhills or Federal Gold Match and see what happens. I do want to replace that stock first. Only shooting irons here too. The trigger is nothing to be desired!
    You can get a trigger job from Bill Springfield and it is a huge improvement. Well worth the money. I think it is 55.00
    Last edited by 97F1504RAD; 12-10-2009, 8:42 AM.

    Comment

    • #32
      high_revs
      Calguns Addict
      • Feb 2006
      • 7947

      Originally posted by 97F1504RAD
      You can get a trigger job from Bill Springfield and it is a huge improvement. Well worth the money. I think it is 55.00
      Yep, he worked on my 3 AR triggers. Am figuring out what else to send him next for a batch (ptr and marlin 795 are ones for sure).

      Comment

      Working...
      UA-8071174-1