Alternatives to Bullet Button and Prince50?

[SkyHawk]

The problem would be attaching it to the lower....maybe glue?

The example photo likely shows a custom hammer pin, probably tapped to accept a small screw - that is what holds on the mag lock.

But featureles may be the way to go - otherwise get ready for some custom fabrication.

Xtreme Precision makes tapped/threaded hammer and trigger pins - all you need is a mag block and a longer screw to match these threads.

http://ar15xtreme.com/product/ar-15-xp-black-154-anti-walk-with-nylock-patch-4130-chromoly-steel/

You could make/carve the block from wood - at least a prototype, then you could use it to make a 3D model.

[BajaJames83]

I actually like the paddle style release.
Lately I've been ditching all y bullet buttons and moving to featureless as putting down my ak to change the mag is pain in the...

[jwilson.redding]

I could probably 3d print a cover for you op. The problem would be attaching it to the lower....maybe glue? Then you drill a hole through the top big enough to use a tool.

Sent from my 0PJA2 using Tapatalk

The example photo likely shows a custom hammer pin, probably tapped to accept a small screw - that is what holds on the mag lock.

But featureles may be the way to go - otherwise get ready for some custom fabrication.

Xtreme Precision makes tapped/threaded hammer and trigger pins - all you need is a mag block and a longer screw to match these threads.

http://ar15xtreme.com/product/ar-15-xp-black-154-anti-walk-with-nylock-patch-4130-chromoly-steel/

You could make/carve the block from wood - at least a prototype, then you could use it to make a 3D model.

Thanks both of you, ziconceo, I will be hitting you in a month or so.

[shhh]

Radlock made these for the qc10/ddles glock lowers. But the lower in your pic looks different.

http://m.ebay.com/itm/181940664334?_mwBanner=1

[supergimp]

I'm using this one on my New Frontier Glock Lower.

https://newfrontierarmory.com/shop/prince50-c-9-bullet-button/

You're looks different but maybe it will give you ideas.

[dozer wright]

I have a bullet button set up like the bottom in ops pics It is from a standard 223 /556 Ar I don't use it . Don't know it will work .

[ziconceo]

Thanks both of you, ziconceo, I will be hitting you in a month or so.

Why would you hit me? I just offered to help

I don't mind doing it for free if money is an issue!

[jwilson.redding]

Why would you hit me? I just offered to help

I don't mind doing it for free if money is an issue!

Ha, I my head I meant, "Hit you up!"

Thanks again!