Precision/sniper rifle picture thread

[CRTguns]

Dude... I beat EVERYBODY, and did it with a 22-250. Crazy. Alright- it's a 7.5 twist pacnor polygonal bore, 1.400" OD barrel, bedded into 6 pounds of glass, carbon and kevlar with a LP MK4 TMR.


That PSG is giving me soggy drawers. Just the thought that I'm in geographical proximity to it... wow.

Did you heat treat the thing after welding?

[Hkfanatic]

i purchased the 10 round mag like 12 years ago i was going to block it so i could use my 91 for hunting but i just use my rem700 instead, i kept it around because i always wanted a PSG-1 and the fact that its on a PTR91 receiver in this damn state means i cannot put one of my 20's into it.

no i did not heat treat it. factory H&K's arent heat treated either they aneal them to releive stress. basicly heat the whole thing up and let it cool slowly over time. i've never heard of anyone with a home build haveing any problems as far as stress cracks or etc... as long as the person who put the rifle togeather used a TIG welder and the proper amount of heat for penetration without overheating the part

if you need a 10 rnd mag THMPR i might be able to find one for you give me some time to track one down, last i checked PTR91.com had some but that was a while ago

[cocorador]

Here's mine.
[IMG][/IMG]

[ucla_jtsuei]

My 91/30 with a 3-9x POSP scope. Thanks Randall (ar15barrels) for the machine work - I won't forget that 10$ I owe ya.

[tombinghamthegreat]

My sniper rifles are no where as cool as everyone else, I am on a tight budget with school. I have to count my Mosin and my deer hunting rifle a sniper rifle, until i could get a real sniper rifle.

[savasyn]

Lucky little guy! I wish my parents let me shoot way back when. I bet he grows up to be one heck of a shooter!

[savasyn]

finished !!!!!

it only took about a year to track down all the parts and about a week to build i think it came out good, the lowest recoiling .308 i've ever fired.

it weighs 17.8lbs and its 48in long

Is that an American made trigger or a foreign one? I'd love to get a new trigger for my SAR8 but it needs to be an American made one.

[Hkfanatic]

its a factory H&K

[robairto]

I have one of those

Browning A-Boll II w/ BOSS in 30-06

NO bipod for big daddy though. I've shot 6 rnds through mine. #'S 4,5,6 WERE all within a nickel at 100 yds.. NOt great but not bad for a box stock rifle and scope. I'll see if I can find the target. I have a $1000+ in the setup and have fired 6 shots in 9 yrs with it. Seems like a waste.

[USN CHIEF]

My Remington

My first precision rifle. Remington 700P LTR .308, 20" flutted barrel with Leupold MK4 3.5 10x50

[Nuuze]

What scope and upper is that?!

[Eagle87Tango]

howa 1500

http://www.calguns.net/calgunforum/showthread.php?p=881237&posted=1#post881237

thar she blows.

.300 win mag, tasco pronghorn 3-9 scope.

[xxG3xx]

pic from today from my desert trip

180gr federal really packs a punch!

im also looking for a nut for the bipod i lost it when i was shooting today

[CRTguns]

Custom (really) Remmy.

BBl is Christiansen tensioned Carbon fiber.
Bottom is badger
Brake is Vais
Trigger is Can-Jar
Safety is a M70 type by ?
Scope is a Loopy 4.5-14x50 TMR
TPS mounts

I made the stock- It'a not modified from another stock- it's 100% handmade. Polyurethane Foam core, Carbon Fiber construction, with a little bit of aramid amid the layers. Wet-sanded down to 800grit, and rubbed with carnuba wax. The rifle sets in a full-length aluminum V block.
The Adjustment in the rear is a wacky design I came up with- the knob in the grip turns the cheekrest up and down. Way over-engineered.

It is NOT that stick-on carbon contact paper.

[Lateralus]

BBl is Christiansen tensioned Carbon fiber.
Bottom is badger
Brake is Vais
Trigger is Can-Jar
Safety is a M70 type by ?
Scope is a Loopy 4.5-14x50 TMR
TPS mounts

I made the stock- It'a not modified from another stock- it's 100% handmade. Polyurethane Foam core, Carbon Fiber construction, with a little bit of aramid amid the layers. Wet-sanded down to 800grit, and rubbed with carnuba wax. The rifle sets in a full-length aluminum V block.
The Adjustment in the rear is a wacky design I came up with- the knob in the grip turns the cheekrest up and down. Way over-engineered.

It is NOT that stick-on carbon contact paper.

Very Nice!!! There is a guy I work with who works with carbon fiber, I wish i could do it.. lol

Looks great. Keep up the good work