Unconfigured Ad Widget

Collapse

Scope Moving

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Rodell
    CGN/CGSSA Contributor
    CGN Contributor
    • Jul 2013
    • 557

    Loctite the bases, but not the rings. At 25 in-lbs they aren't going to come loose.

    Also, a drop of fingernail polish (your favorite color) to act as a witness mark will give you confidence every time you see it. Bridge the ring to the tube with a single drop.

    Comment

    • #17
      ElvenSoul
      I need a LIFE!!
      • Apr 2008
      • 17431

      I would try some different rings.
      sigpic

      Comment

      • #18
        Divernhunter
        Calguns Addict
        • May 2010
        • 8753

        ^^^ And you would just be wasting good money.
        A 30cal will reach out and touch them. A 50cal will kick their butt.
        NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
        SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

        Comment

        • #19
          jtv3062
          Veteran Member
          • Oct 2005
          • 2778

          Originally posted by ar15barrels
          Lapping is for correcting bad bases much more than bad rings.
          It's the base that usually throws the rings out of alignment, creating the need for lapping.
          When the base is flat, lapping usually does nothing for alignment.
          Twisted bases show a lot more change from lapping.
          I agree.

          Why ruin a nice set of rings, before checking to see if something is causing the rings to be missed aligned. Maybe a scope base bedding job is in order.
          Do not fear the enemy, for your enemy can only take your life. It is far better that you fear the media, for they will steal your Honour
          Let's pray for Obama Psalm 109:8






          159

          Comment

          • #20
            Whiterabbit
            Calguns Addict
            • Oct 2010
            • 7602

            Originally posted by mr_benster
            Well that quickly fixes the issue.

            Thanks,
            well, you already found this out, but.

            four screws torqued to spec will hold MUCH more securely than four screws, all torqued even tighter, but not to the same torque. The uneven pressure lets the recoil rock tihngs loose.

            Also helps to tighten incrementally, and in a "star" pattern to ensure even tightening.

            Rock solid after that.

            Comment

            Working...
            UA-8071174-1