Unconfigured Ad Widget

Collapse

20moa base differences? (Rem 700) *Update* #23 Bedding Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Cowboy T
    Calguns Addict
    • Mar 2010
    • 5725

    Just tried out both a Nightforce Standard Duty (aluminum) base and an EGW (also aluminum) base. Both are the 20 MOA versions. Not sure about the big magnums, but both worked well on the .308 Win rifles. No problems.

    The EGW is about $45, and the Nightforce Standard Duty is about $55-60.
    "San Francisco Liberal With A Gun"
    F***ing with people's heads, one gun show at a time. Hallelujah!
    http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
    http://www.liberalsguncorner.com (podcast)
    http://www.youtube.com/sfliberal (YouTube channel)
    ----------------------------------------------------
    To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

    Comment

    • #17
      JMP
      Internet Warrior
      CGN Contributor - Lifetime
      • Feb 2012
      • 17056

      Originally posted by Cowboy T
      Just tried out both a Nightforce Standard Duty (aluminum) base and an EGW (also aluminum) base. Both are the 20 MOA versions. Not sure about the big magnums, but both worked well on the .308 Win rifles. No problems.

      The EGW is about $45, and the Nightforce Standard Duty is about $55-60.
      You won't have any issues with an aluminum base. In fact,most of mine are aluminum as that's what many rifles come with. I go steel only if it is aftermarket. Why? There's no harm in getting something stronger. However, with mount/rings, I go aluminum as this provides better friction mount on an aluminum scope. Plus, your rings should be the same material as your scope tube so that the two objects expand and contract at the same rate.

      Comment

      • #18
        timbo399
        Senior Member
        • Jul 2010
        • 1765

        tagged

        Comment

        • #19
          eviioiive
          Senior Member
          • Oct 2005
          • 1620

          steel or titanium from a reputable manufacturer. Think strength AND thermal properties
          Originally posted by Kestryll
          Your name has been publicly printed in newspapers and on the web, your expectation of privacy is flat gone.
          Originally posted by CALGUNS.NET
          You have been banned for the following reason: posting other member's personal info without permission. I don't care what your reasoning is that is not allowed.

          Comment

          • #20
            vliberatore
            CGN/CGSSA Contributor
            CGN Contributor
            • Dec 2011
            • 10055

            I'm one of the few who has a LaRue base. I never have to think about it, which is exactly what I was looking for.
            Originally posted by fighterpilot562
            Damn it man! We could have got drunk, called a taxi and drop by Kest house with a mega phone.

            Comment

            • #21
              Cowboy T
              Calguns Addict
              • Mar 2010
              • 5725

              Originally posted by JMP
              You won't have any issues with an aluminum base. In fact,most of mine are aluminum as that's what many rifles come with. I go steel only if it is aftermarket. Why? There's no harm in getting something stronger. However, with mount/rings, I go aluminum as this provides better friction mount on an aluminum scope. Plus, your rings should be the same material as your scope tube so that the two objects expand and contract at the same rate.
              Good point. Either that or Burris Signature Zee rings w/ those plastic inserts. I'm using those rings on both the Nightforce Std. Duty and EGW aluminum bases. Also seems to be a good solution.
              "San Francisco Liberal With A Gun"
              F***ing with people's heads, one gun show at a time. Hallelujah!
              http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
              http://www.liberalsguncorner.com (podcast)
              http://www.youtube.com/sfliberal (YouTube channel)
              ----------------------------------------------------
              To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

              Comment

              • #22
                MMXX
                Member
                • May 2013
                • 349

                I went with the TPS 20moa base. Need for bedding?

                I went with the TPS 20 MOA base (got a great deal).

                I went to install it with the expectation to have to bed the scope rail after reading about others Remington 700 experiences.

                When I went to install it, to check for a gap in the rear of the base because there was none visible, I decided to slide a piece of paper (one thousandths) under to test for a gap and only through a little effort was I able to get the paper partly underneath.

                Is this acceptable or should I still attempt to bed the scope base?

                Comment

                • #23
                  ar15barrels
                  I need a LIFE!!
                  • Jan 2006
                  • 57199

                  Originally posted by MMXX
                  When I went to install it, to check for a gap in the rear of the base because there was none visible, I decided to slide a piece of paper (one thousandths) under to test for a gap and only through a little effort was I able to get the paper partly underneath.
                  How are you checking for gap?

                  The procedure I use is to install all 4 screws, but leave them a couple turns loose.
                  Then, tighten the front two completely and see if I can push the rear of the base down and detect or measure any movement.
                  If there is no movement, I loosen the front two screws and tighten the rear two and then check the front for movement.
                  If no movement is found there, I don't worry about bedding.
                  If movement is found on EITHER end, that end should be bedded.

                  If the rail sits flat/square, no bedding OR lapping should be needed.
                  If the rail needs bedding, but you don't do it, you should then lap the rings to account for the rail being bent while being tightened down.
                  I would MUCH rather have a rail sitting straight so I don't need to worry about lapping rings.
                  Randall Rausch

                  AR work: www.ar15barrels.com
                  Handguns: www.handgunbarrels.com
                  Bolt actions: www.700barrels.com
                  Foreign Semi Autos: www.akbarrels.com
                  Most work done while you wait on a scheduled shop visit.

                  Comment

                  • #24
                    MMXX
                    Member
                    • May 2013
                    • 349

                    I tried to put blank receipt underneath the back while I tightened down the front. Had to pry the rear of the rail to get it to go underneath.

                    Also, just to see if it made any difference I tightened down the rear too, and it made an imprint on the receipt of where the contact of the rail rear was making on the receiver. This was probably just a bogus test. (Kind of like a check or credit card receipt imprint)

                    Trying your method there was no movement in either direction. Nor side to side. I just didn't think I was that lucky. Thanks for the piece of mind.

                    Comment

                    Working...
                    UA-8071174-1