Unconfigured Ad Widget

Collapse

20moa base differences? (Rem 700) *Update* #23 Bedding Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MMXX
    Member
    • May 2013
    • 349

    20moa base differences? (Rem 700) *Update* #23 Bedding Question

    I settled on a SA Remington 700.

    I now need to get a base to mount a Vortex 4-16x50 and I've been reading information about 20moa bases versus others and will probably settle on that however which one to buy?

    I would like some opinions as they all seem to be fairly similar. I've seen Badger Ordinance, EGW, Larue, Leupold, Nightforce, Seekins, Weaver, Warne, and many others.

    Are there any features that set some of these apart? Material, Weight, Rigidity, Looks?

    Are there any custom shops that offer unique ones?
    These guys make some nice fitting ones for the Tikka.
    Designed and manufactured by Greystone Guns these rails are made from 7075 aluminium and machined to MIL-STD-1913 Picatinny Rail standards. They are designed to fit Tikka T3 rifles and come with 4x Torx 6×48 screws. 0 MOA: $125.00 …
    Last edited by MMXX; 07-18-2015, 11:23 AM. Reason: Update - Question on bedding the scope rail base
  • #2
    thai562
    Senior Member
    • Oct 2010
    • 1199

    I use TPS base. They are relatively cheap and high quality. Steel for rigidity and should has a recoil shoulder which most good brand base has one.

    Comment

    • #3
      NorCalFocus
      Veteran Member
      • Aug 2013
      • 3913

      I've been running a EGW and its been fine. The general concensus is the TPS steel is the best value low budget option. Badger/Nightforce/Larue/Seekins are all top end and you can't go wrong with any of them.

      Considering the scope you bought, I personally say the TPS base and rings would be a great fit/match.

      Comment

      • #4
        Thanatos2203
        Senior Member
        • Jan 2012
        • 1200

        I too have an EGW and I think they are a great value for the money. None of the mounts listed will do you wrong and they will all last forever. The mounting screws in a high recoil rifle would fail long before anything else would. Get what agrees with your budget.

        I have had a problem with blued Leupold mounts (dovetail) rusting on a 700 between the mount and the rifle as well as rings both on the the exterior and inside around the scope tube. I don't know what the finish is like on their other bases. I believe that some of their two piece bases are OEM from Warne.
        sigpic

        Comment

        • #5
          ar15barrels
          I need a LIFE!!
          • Jan 2006
          • 57198

          Originally posted by MMXX
          I settled on a SA Remington 700.

          I now need to get a base to mount a Vortex 4-16x50 and I've been reading information about 20moa bases versus others and will probably settle on that however which one to buy?
          This is what you need for a right handed short action Remington 700:

          Randall Rausch

          AR work: www.ar15barrels.com
          Handguns: www.handgunbarrels.com
          Bolt actions: www.700barrels.com
          Foreign Semi Autos: www.akbarrels.com
          Most work done while you wait on a scheduled shop visit.

          Comment

          • #6
            ar15barrels
            I need a LIFE!!
            • Jan 2006
            • 57198

            Originally posted by InsanePropane
            Thoughts on this one? Gonna stick a MK4 in it
            http://nightforceoptics.com/accessories/direct-mount/
            Nightforce one-piece mounts are very well made.
            The trick is figuring out which height to go with to get the scope as low as possible, yet still clear the scope...
            Randall Rausch

            AR work: www.ar15barrels.com
            Handguns: www.handgunbarrels.com
            Bolt actions: www.700barrels.com
            Foreign Semi Autos: www.akbarrels.com
            Most work done while you wait on a scheduled shop visit.

            Comment

            • #7
              connected
              Junior Member
              • Nov 2013
              • 16

              Have a seekins base, seems to be great quality. The receiver was slightly off so I bedded it, once I can afford the rings I should be set.

              Comment

              • #8
                Sinister_Rounds
                Junior Member
                • Jul 2011
                • 47

                I went with a DNZ Game Reaper one piece. They make some different heights (low, mid, high) and seem well built. I mounted a VX-III 3-9x40 with a mid on my savage

                Comment

                • #9
                  CrackedShot
                  Member
                  • Feb 2007
                  • 137

                  Check out the Ken Farrell bases and rings. I have them on my 700 VLS and they are very solid.
                  You can always count on Americans to do the right thing - after they've tried everything else.
                  Winston Churchill

                  Comment

                  • #10
                    thegiff
                    Member
                    • Aug 2008
                    • 364

                    I have a Farrel base, they are weaver not milspec, so most milspec rings won't fit.
                    So Cal Precision Rifle Team, NRA Life, WEGC Precision Bolt Rifle Director, NRL Member, Bolt Action Rifle Groupie, NRA Pistol Distinguished Expert

                    Comment

                    • #11
                      MMXX
                      Member
                      • May 2013
                      • 349

                      I do appreciate all the info.

                      Originally posted by ar15barrels
                      This is what you need for a right handed short action Remington 700:

                      http://swfa.com/TPS-XP-Tactical-1-Pi...se-P42035.aspx
                      I'm looking at the base at midway and wondering whether its the 6-48 or 8-40
                      torx screws.

                      Comment

                      • #12
                        Powder_Keg
                        Senior Member
                        CGN Contributor
                        • Jan 2013
                        • 2203

                        Originally posted by InsanePropane
                        Thoughts on this one? Gonna stick a MK4 in it
                        http://nightforceoptics.com/accessories/direct-mount/
                        I have that NightForce setup on my R700. Great Fit! Plus less parts compared to a separate railed base and a pair of rings, but the seperate rail/rings combo will allow you to move the scope location more. I've mounted 2 scope with the NightForce rings and I had no issue with eye relief or scope location. Below is the exact model I went with. My R700 has a 20" bull barrel and I've mounted 2 different scopes and they both cleared the barrel with zero issues. They both had 30mm tubes, one had a 50mm objective that was very close to the barrel, about 1/8". The second scope had a 44mm objective and I have about 3/16" - 1/4" clearance.

                        NightForce Direct Mount - Remington 700 Short Action .885 Low - 20 MOA - 30mm, Black A220

                        Comment

                        • #13
                          JMP
                          Internet Warrior
                          CGN Contributor - Lifetime
                          • Feb 2012
                          • 17056

                          I'll be the guy that offers an unpopular opinion. I like 0 MOA one-piece bases made of steel. The problem with the cheap EGW crap is that they have weak screws that tend to strip. This isn't a problem, usually, as once you mount your base, it should be pretty much done. The reason I like 0 MOA bases is because I do not like using rings. I prefer 1-piece mounts. Then, you get the appropriate cant for your scope.

                          Now with one-piece mounts, you will have your scope sitting higher so the scope can clear the mid section. It depends on what type of shooting you do.

                          Short range tactical/precision shooters like to have the scope sitting as low as possible with minimal bell clearance. Long range shooters like to have some elevation in the mount. Really, as long as they are not moving relative to each other, the bore height becomes a non issue after a certain distance. Having as little possible bore height is more important when you are shooting near, especially, inside your zero as it will minimize the adjustments you need to make. Long range shooters with big guns that aren't going to shoot close up will have extra bell clearance. No disadvantage is seen so long as you can get the right cheek weld height with a tall bore height, then very steep cants can be applied without an issue, and most importantly, your scope will sit high enough to avoid picking up mirage from your barrel so a silly mirage band is not needed.

                          20 MOA is about the right amount for folks shooting 0-1000 as they'll be using 20-40 MOA to get there and say in a nice comfortable range along the way.

                          Comment

                          • #14
                            SonofWWIIDI
                            I need a LIFE!!
                            • Nov 2011
                            • 21583

                            Thanks for the info.

                            Tagged!
                            Sorry, not sorry.
                            🎺

                            Dear autocorrect, I'm really getting tired of your shirt!

                            Comment

                            • #15
                              ar15barrels
                              I need a LIFE!!
                              • Jan 2006
                              • 57198

                              Originally posted by MMXX
                              I'm looking at the base at midway and wondering whether its the 6-48 or 8-40
                              torx screws.
                              6-48 is standard for Remington.
                              It would take some gunsmithing work to upgrade to 8-40 screws.
                              Randall Rausch

                              AR work: www.ar15barrels.com
                              Handguns: www.handgunbarrels.com
                              Bolt actions: www.700barrels.com
                              Foreign Semi Autos: www.akbarrels.com
                              Most work done while you wait on a scheduled shop visit.

                              Comment

                              Working...
                              UA-8071174-1