AR pistol pic thread

[wingman]

How I mounted 4 CCA cheek rest

How is that CAA cheek rest attached to the buffer tube? I purchased one of those cheek rests and can't figure out how to attach it. It fits very loose on the buffer tube

First off I have Spike tube with pad. I took the CCA cheek pad and removed extra plastic around rear holes and put 2" 8-32 brass screw in them to clamp down back. I then drilled holes in front of it so the screw was inside small tube on bottom and this clamp down the front (not to tight). Hope this helps, I can email a pic if u wish!
PS It also helped to upgrade latch handle (Mod4) to reduce pad catching the handle.

[EBR Works]

I took the CCA cheek pad and removed extra plastic around rear holes and put 2" 8-32 brass screw in them to clamp down back. I then drilled holes in front of it so the screw was inside small tube on bottom and this clamp down the front (not to tight). Hope this helps, I can email a pic if u wish!
PS It also helped to upgrade latch handle (Mod4) to reduce pad catching the handle.

Could you post pics of this mod so I can lose the zip ties? Thanks.

[till44]

My AR pistol has sat in my safe for probably a year now, it just doesn't get used, so I have been out of the loop with the whole AFG not a second hand grip statement from ATF.

So to clarify, AFGs are GTG on locked mag pistols but not on featureless rifles as there is still no word from CA DOJ as to whether the AFG is classified as an evil feature. From my understanding then, b/c my AR pistol is a reg'd AW, I can throw an AFG on it and still be legal, as it is exempt from all CA evil feature restrictions and ATF has said the AFG is not a second grip making an AOW... Is my thinking flawed or what?

[EBR Works]

My AR pistol has sat in my safe for probably a year now, it just doesn't get used, so I have been out of the loop with the whole AFG not a second hand grip statement from ATF.

So to clarify, AFGs are GTG on locked mag pistols but not on featureless rifles as there is still no word from CA DOJ as to whether the AFG is classified as an evil feature. From my understanding then, b/c my AR pistol is a reg'd AW, I can throw an AFG on it and still be legal, as it is exempt from all CA evil feature restrictions and ATF has said the AFG is not a second grip making an AOW... Is my thinking flawed or what?

ATF has stated that it does not make the firearm an AOW. DOJ has not taken a position. Below is the ATF letter. The AFG is mentioned in the last question:

[MrPlink]

heres a crappy cel pick of my first build ever I just finished.
Took me quite a few months to do, as Ive been caught up with so many other things.
Now I just need the time to shoot it!

This is actually my first "build" ever


Being that the upper is a LMT, I originally had planned on doing something of a more modern MK18 pistol, but ultimately decided to keep things a bit more simple and old school looking.

10.5" LMT upper
home completed 80% lower with no markings ()
BCM BCG
DPMS lpk
BCM gunfighter large latch charging handle
convertible bullet button
colt carry handle
double heat sheilded std type handguards
rifle extension tube and buffer


While I do think the A2 fits with the over all look rather well, I really hate these things, and have dumped them immediately on every firearm I own that came with one. I think I am gonna toss a MIAD on there.

Im going to see if I can get a DD ez carbine sling mount to work with it, plus add a can butt cap to the buffer tube and I think Im finished.

[EBR Works]

is still not complete but here it is:
CA Registered AR 308 Pistol
Note: mag is a 10/20
JD lower and upper (matching set)

Nice! What is the barrel length/twist?

[rareair]

This is actually my first "build" ever


10.5" LMT upper
home completed 80% lower with no markings ()
BCM BCG
DPMS lpk
BCM gunfighter large latch charging handle
convertible bullet button
colt carry handle
double heat sheilded std type handguards
rifle extension tube and buffer

You may want to reconsider the buffer tube before bringing it out for public viewing. That tube can accept a stock, and then can be configured as a SBR

[EBR Works]

It's usually stamped somewhere on the barrel. The manufacturer of the barrel could tell you as well.

[MrPlink]

You may want to reconsider the buffer tube before bringing it out for public viewing. That tube can accept a stock, and then can be configured as a SBR

does not matter, I dont own a A1 or A2 stock with an adapter hence I cannot be charged with constructive possession. The only other stock I own that is for an AR15 is a std carbine stock which wont work with that extension so its moot.

Check archived posts on ARFCOM, this has been covered to no end.

Regardless, Im going to permanently attach a screw or just remove the threading on it just to play things a bit on the safe side.

[DonFerrando]

Sick!

[hotprowl]

Here's mine

[tonelar]

Is 10.5 . I don't know about the twist. How can I tell by looking at it?
PM the answer and I will replay back if you wish.

Run a patch through it.... If it makes a half turn in 4.5 inches, it's a 1:9 twist bbl.

[wizard101]

Here's mine

Any pics ABOVE the shoulder??????

[tacticalcity]

Here's mine

There's an AR in that picture? Where? I sure don't see it.

[rareair]

There's an AR in that picture? Where? I sure don't see it.

Just below the boobies