DELETE
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
DELETE
Collapse
X
-
Tags: None
-
Brownell's has a lot of stuff.When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones." -
-
I wasnt sure, but does wilson combat make parts for variety of 1911 brands? Sorry i dont know much about themOriginally posted by OpplaWilson CombatComment
-
What you are looking for are Government Model 1911 parts. Some parts will be drop in (or will drop in without hand fitting), some parts will be required to be fit with a file or stone, etc.
Check out the YouTube videos on building a 1911, fitting specific parts for upgrades, etc.
Good luck.When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."Comment
-
Your best off just sending it back to the Springfield Armory Custom Shop for the work. Unless you have the tools and time to put in the effort it will actually save you money. Even parts that say they are drop in are usually not.
Ask yourself why you want those items first, because you are probably looking at around $500 by the time the gun is back on your doorstep.
Beavertail $100... usually needs to be refinished and a commander style hammer.
Trigger job with a commander hammer and light weight trigger $150
Ambi-Safety $100
Refinish $100 - 200
Gotta add sights... $85 - $150
shipping $40 (Call SACS and they will help you with it.)
Truth be told, I chose that route over a loaded. I got an epic trigger, perfectly fitted beavertail and some Heinie sights for a stainless. I'm happy. All told, gun was gone for a week... maybe 10-days.Comment
-
For the cost of material/parts you have to buy + shipping + tools + time + grief + estimated cost of boo boos damging the gun that will happen if you are not a trained smith with a shop, you will be way ahead in time and money to just send it in to Springfield.
Most importantly, if Springfield does the job, they warranty the work for life as well. if you do it, it will end up a Frankengun.
Believe me, been there and done that and I won't try it again.
Good luck to you.Comment
-
I have done some research on this type of project in the past and it is simply not worth the time and money unless you really want to learn how to do this yourself.
It would be far easier to sell it and get a used loaded model for just a little more.Originally posted by BumslieHK - the best 600 dollar gun, 900 dollars can buy.Originally posted by SleighterGetting legal advice from a gun salesman, is like getting medical advice from a janitor at a hospital. Both make about the same per hour and both prove that being around something all day doesn't make you an expert.
Lifetime NRA member.Comment
-
Your best off just sending it back to the Springfield Armory Custom Shop for the work. Unless you have the tools and time to put in the effort it will actually save you money. Even parts that say they are drop in are usually not.
Ask yourself why you want those items first, because you are probably looking at around $500 by the time the gun is back on your doorstep.
Beavertail $100... usually needs to be refinished and a commander style hammer.
Trigger job with a commander hammer and light weight trigger $150
Ambi-Safety $100
Refinish $100 - 200
Gotta add sights... $85 - $150
shipping $40 (Call SACS and they will help you with it.)
Truth be told, I chose that route over a loaded. I got an epic trigger, perfectly fitted beavertail and some Heinie sights for a stainless. I'm happy. All told, gun was gone for a week... maybe 10-days.For the cost of material/parts you have to buy + shipping + tools + time + grief + estimated cost of boo boos damging the gun that will happen if you are not a trained smith with a shop, you will be way ahead in time and money to just send it in to Springfield.
Most importantly, if Springfield does the job, they warranty the work for life as well. if you do it, it will end up a Frankengun.
Believe me, been there and done that and I won't try it again.
Good luck to you.honestly all I want is the ambi safety, and beaver tail. nothing more nothing less. Im not looking to make it look like optimus prime, I just want to add safety. Ive shot the gun before, and never had any problems. Totally loved it, but I definitely want the ambi safety.
If I want to do cosmetics maybe laser engravings, and pearl grips
Comment
-
Simply adding the beavertail and fitting it is probably the worst part since it will need to be refinished afterwards.honestly all I want is the ambi safety, and beaver tail. nothing more nothing less. Im not looking to make it look like optimus prime, I just want to add safety. Ive shot the gun before, and never had any problems. Totally loved it, but I definitely want the ambi safety.
If I want to do cosmetics maybe laser engravings, and pearl grips
Originally posted by BumslieHK - the best 600 dollar gun, 900 dollars can buy.Originally posted by SleighterGetting legal advice from a gun salesman, is like getting medical advice from a janitor at a hospital. Both make about the same per hour and both prove that being around something all day doesn't make you an expert.
Lifetime NRA member.Comment
-
it doesn't HAVE to be, especially if you use the WC drop in one.
Sure the finishes may not match, but since you didn't have to shave the frame to round it off properly (
) you don't have to worry about bare metals.
I didn't care as much about looks as I did not getting a bloody hand web every time I shot the gun (i tend to hold high since I mainly shoot glocks)
WC Drop in hammer, sear, beavertail saftey. The safety took fitting, but the hammer and sear basically dropped in. It's not a target trigger/sear setup, but it's still good and slightly better than factory. Passed all the safety tests as found all over the internets.
Last edited by Mossy Man; 01-22-2015, 7:55 PM.Comment
-
Wilson Combat. I bought a few parts for my Springfield 1911, and about to order more.100% deplorable
Comment
Calguns.net Statistics
Collapse
Topics: 1,870,779
Posts: 25,175,907
Members: 358,862
Active Members: 5,399
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 29930 users online. 150 members and 29780 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment