Unconfigured Ad Widget

Collapse

Rust maintenance ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Feartoy
    Junior Member
    • Jul 2013
    • 21

    Rust maintenance ?

    I'm looking to buy a Les Baer custom carry. Before I send $$$$ on a 1911 I wanted to make sure I'm not setting myself up 10 years down the road for a mistake. I'm a little concerned about a Blue Steel gun and rust. I'm good about cleaning and oil after we shoot but what if that one time I put them away dirty and pull it out 4 months latter and find the mess?
    I've been looking at the TRP and the Mc Operator and like the idea of the "army Kote"

    So am I setting myself up latter for a maintenance nightmare?

    Thanks
    Dave
  • #2
    SantaCabinetguy
    I need a LIFE!!
    • Feb 2011
    • 15142

    Just keep it oiled. NBD.
    Hauoli Makahiki Hou


    -------

    Comment

    • #3
      DArBad
      Veteran Member
      • Dec 2009
      • 3002

      Believe me, if you have a blued LB Custom Carry, you will not " forget " to clean it after shooting. Its a beautiful gun. That said, its no big deal to do a modicum of gun care on ANY gun.

      A simple field strip, run a few patches of Hoppe's 9 down the bore, lubricate, how hard can that be??? Blue finish while not as durable as the other kind, can last if given a regular wipe-down. Even the exotic finish can get corroded if neglected.

      Just my thought on the matter.

      Comment

      • #4
        The Shootist
        Senior Member
        • May 2010
        • 1796

        Rust = Neglect......most people don't have issues keep it oiled and it will be fine. Like someone else mentioned it's a les Baer it'll be hard not to look at it every now and then. I have several blued guns a decade or more old that have zero rust.
        NRA ENDOWMENT LIFE MEMBER
        CRPA MEMBER
        FIREARMS POLICY COALITION MEMBER
        CGN CONTRIBUTOR

        Comment

        • #5
          uwinrodgers
          Junior Member
          • Apr 2011
          • 19

          Eezox for rust maintenance...borestores for covering the firearm

          Comment

          • #6
            PandaBear
            Member
            • Apr 2013
            • 485

            I use Eezox for rust protection and it goes on all parts that can potentially rust. I don't know how it holds up as a lube, so I use TW-25 for friction areas and FireClean for the bores.

            Comment

            • #7
              osis32
              Calguns Addict
              • Jul 2009
              • 5912

              Third testament for eezox. That stuff I'd tried and true. Apply and let cure. You can even do a second coat. I do mine at night and let cure over night as they are sticky while it dries. Silicon socks/bore stores for long term storage.
              Just a libertarian guy in a Leftist Authoritarian state.

              Comment

              • #8
                Feartoy
                Junior Member
                • Jul 2013
                • 21

                I have a Remington 700 and a JD AR and really haven't had a problem keeping them Rust free... Just wanted to hear what I already know.
                I have been using Frog lube. Maybe borestores be a good idea also.

                Comment

                • #9
                  Galli1565
                  Senior Member
                  • Jul 2012
                  • 800



                  This and CLP, I wipe my gun down after ever shift when I get home. I work near the ocean and have zero rust issues. Just keep it clean and lubed and you will be good to go.
                  Certified Colt 1911 Armorer // Certified Glock Armorer // Certified M&P Armorer

                  Comment

                  • #10
                    Justintoxicated
                    Veteran Member
                    • Mar 2009
                    • 3836

                    Originally posted by Feartoy
                    I'm looking to buy a Les Baer custom carry. Before I send $$$$ on a 1911 I wanted to make sure I'm not setting myself up 10 years down the road for a mistake. I'm a little concerned about a Blue Steel gun and rust. I'm good about cleaning and oil after we shoot but what if that one time I put them away dirty and pull it out 4 months latter and find the mess?
                    I've been looking at the TRP and the Mc Operator and like the idea of the "army Kote"

                    So am I setting myself up latter for a maintenance nightmare?

                    Thanks
                    Dave
                    My HK is blued and has zero rust after years now. I just keep my safe dry and haven't run into any issues. I use froglube as well since it doesn't migrate like oil, it's not the best rust preventative though, I tried wiping down my reloading shellplates with it and they still developed some rust.

                    Comment

                    • #11
                      heidad01
                      Veteran Member
                      • Feb 2012
                      • 4902

                      "4 months" ouch. That is too long after range handling without oiling. Go stainless if you do not want to change your gun cleaning routine.

                      Comment

                      • #12
                        Black Majik
                        Calguns Addict
                        • Oct 2005
                        • 9695

                        I would keep it oiled the best you can. The Les Baer bluing is very thin, so after a while when the bluing has almost completely worn off maintenance is definitely higher.

                        I try my best to keep my Premier II in a dry environment, always lubed. However, I do still get freckles here and there.





                        When it was new however I never ran into rust issues. This only happened when the bluing became very thin. Of course, YMMV and FWIW.

                        Still fantastic shooting 1911s. I think the enjoyment of this pistol outweighs the weak finish. If the bluing worries you there are plenty of other finishes that are MUCH more durable.

                        Good luck.

                        Comment

                        • #13
                          faterikcartman
                          Senior Member
                          • Aug 2006
                          • 1404

                          Eezox and a golden rod in the safe. Do an initial strip down, clean, Eezox, lubricate, then, after range trips put some Eezox on a rag and wipe down the exterior of the gun where your oily hands may have touched it and you will probably be GTG. Eezox is one of those rare products that actually exceeded all my hopes and expectations.

                          And it has a smell that is much less likely to piss off your wife if you're applying on the kitchen table. Unlike, for example, Hoppe's No. 9.

                          That said, I would get a DW Valor Black instead.
                          Introduction: Welcome to the Severns Custom 2011 “Thunder In The West Shoot-Out! Before I get started, a few notes and house-keeping details. First, as with past shoot-outs, please understand that this article will include a lot of photo and video insertions, and typing. As such, due to photo...
                          Last edited by faterikcartman; 10-18-2014, 1:45 PM.
                          I am not your lawyer. I am not giving you or anyone else who reads my posts legal advice. I am making off-the-cuff comments that may or may not be accurate and are personal, not professional, opinion. If you think you need a lawyer please retain a qualified attorney in your jurisdiction. Your local bar association may be able to help if you need a referral.

                          Two Weeks!: http://www.calguns.net/calgunforum/a...p/t-59936.html

                          Comment

                          • #14
                            Dee_Dub
                            Senior Member
                            • Aug 2011
                            • 2097

                            Hoppes 9 and 000 steel wool. I used this to take off some rust on a Rem 870. Its like a brand new gun.
                            A man's GOT to know his limitations.

                            Comment

                            • #15
                              CK_32
                              I need a LIFE!!
                              • Sep 2010
                              • 14369

                              When in doubt, Eezox will get it out.


                              Still the best rust killer I've used yet, super toxic tho. Outdoor cleaner for sure but it kills just about anything.
                              For Sale: AR500 Lvl III+ ASC Armor

                              What's Your Caliber??


                              My Youtube channel

                              Comment

                              Working...
                              UA-8071174-1