Unconfigured Ad Widget

Collapse

Px4 Storm Issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    tenclip
    Member
    • Feb 2013
    • 245

    I should have mentioned as well that my PX4 was absolutely perfect from day one and was a fine, fine gun. Never one feed problem no matter what I fired, though every gun I own goes through the same initial steps (re-lube, slide lock resting, hot ammo, no steel case or reloads) for break in and can't say that any I have owned has ever given me a problem. If I ever had a problem after those steps, I would send it in.
    IDPA - SSP/ESP/CCP | USPSA - Production/L10 | Personal Handgun Instructor

    Comment

    • #17
      A-J
      Veteran Member
      • Dec 2011
      • 2586

      Originally posted by fredridge
      What I am saying is that IT IS POSSIBLE FOR THE GUN TO BE THE PROBLEM.
      Dude, the OP asked:

      Has anyone seen this before? My Px4 will not make it through a magazine without a FTE or a Stovepipe. The last round does not even eject from the gun after being fired. Any thoughts? Could the extractor be too tight, maybe needing to be filed down?
      Your post implies that everyone was saying it's the OP and not the gun. We proceeded to offer our experiences as asked, and I don't believe anyone said the gun cannot be the problem. Speaking generally, on popular platforms, the shooter is probably the problem in the majority of cases. In this particular situation, noone seems to have had similar issues that were not shooter related (lube, crap ammo, etc.) in which case, assuming that the ammo and lack of lube are not hte issue, then by default it MUST be the gun.


      Originally posted by SilverTauron
      A malfunctioning weapon may be acceptable for a 1911s with less then 500 rounds,but not a Beretta.Send that defective piece back to Maryland for service forthwith.
      Originally posted by fredridge
      I laughed...but seriously - is that common with new 1911's? haven't owned one yet, but planning on it down the road
      Depends on what kind. If it's made to very tight tolernaces (think Kimber Custom II) then yeah, it takes a while to get everything worn in and working flawlessly. My wife's took a littel less than 500 rounds to get there. Now it goes bang every time with no issues that are not user-related (read - lube).
      It was not a threat. It was an exaggerated response to an uncompromising stance. I was taught never to make a threat unless you are prepared to carry it out and I am not a fan of carrying anything. Even watching other people carrying things makes me uncomfortable. Mainly because of the possibility they may ask me to help.

      Comment

      • #18
        pitbuljake
        Member
        • Jun 2012
        • 226

        I had the same issue with my PX4 Storm when I bought it 5 years ago, turns out since it was new the magazine springs were to tight causing what you have described. I was advised to load up the magazines and leave them that way for about 2 weeks I believe.

        I have never had any issues since. I make sure I do this with all my semi autos, even when not in use I leave them loaded up to the max. Works for me!

        Comment

        • #19
          sammy
          Veteran Member
          • Oct 2006
          • 3847

          That ammo looks very underpowered. I am guessing reloads and not by you? Run factory ammo through it and that should solve your problem.

          Comment

          • #20
            jcalabria
            Junior Member
            • Feb 2013
            • 7

            Sorry for the delay in posting, but work seems to get in the way.

            The ammo used was factory Winchester White Box, Blazer Brass, Blazer Aluminum, and PMC. All were 115gr so maybe I could try 124, but that is easier said than a reality these days. I had the same results with both factory mags and aftermarket mags. I even had a factory mag left over from the stolen Px4 which I know worked in the first gun.

            I have had about 5 people try the gun all having the same issues, stovepipe every 2 to 5 rounds.

            As for me, this is my 3rd pistol and my second Px4. Had a Ruger 40 cal many years ago, and had a Px4 that was flawless which I really liked but it was stolen about a year ago. That was why I replaced it with the same model.

            I received a reply from Berreta today and they have provided me with what I need to send it in. Now I just have to find the time to drive the 40 miles to the UPS shipping center to get it send in. Never shipped a gun before so I need to read up on that a little.

            Thanks to everyone that took the time to read my post and offered up experiences and info. All of it was helpful in one way or another. Guess I could have done a better job of providing more info on the front end.

            Comment

            • #21
              Tommy C
              Senior Member
              • Aug 2013
              • 820

              This is strange, OP. I've run over 4000 rounds through my PX4 40S&W & have never had a malfunction of any kind. IMO, the PX4's have Glock-like reliability. Who knows, maybe you have a bad one....
              -Tommy

              Comment

              • #22
                TacticalSenior
                Junior Member
                • Jan 2012
                • 26

                Originally posted by bigbearbear
                I shot off the entire box of 50 rounds and liked it so much I went to the counter and bought one on the spot.
                Congratulations! My PX4 9mm shoots all kinds of ammo without any issues so far. I probably have 1000 rounds through it so far. I got mine at Reeds too.
                I believe there are more instances of the abridgment of the freedom of the people by gradual and silent encroachments of those in power, than by violent and sudden usurpations .. James Madison

                12E20 USAREUR 1973 - 1975

                Comment

                • #23
                  jcalabria
                  Junior Member
                  • Feb 2013
                  • 7

                  UPDATE:
                  I opened a case with Beretta on 9/3, received a reply the following day suggesting that I return the firearm to Beretta so they could assess the situation. I filled out the return form online and a pickup was scheduled. The firearm was shipped off on 9/5 and arrived at Beretta, MD on 9/9. Received notification on 9/12 that firearm was on its way back to me. I received the gun today, and according to the packing list the following was done:

                  "Pre and safety check. Noted customer's concern. Initial test fire confirmed stove piping issues. Replaced hammer group. Repeat test fire 30 rounds 115 grain Black Hills JHP testing customer's magazines without malfunctions noted."

                  Less than a week and a half turnaround, not bad at all. I can't wait to get it back out and put some rounds though it. All in all I am extremely happy with Beretta's customer service and extremely fast turn around.

                  Comment

                  • #24
                    Hoser!!
                    Member
                    • Dec 2012
                    • 244

                    I'm glad your issue was resolved. My PX4 has been flawless. I'm hoping my new to me Kimber Custom II w/ less than 100 rnds will be the same...

                    Comment

                    • #25
                      fredridge
                      Senior Member
                      • Sep 2012
                      • 1090

                      nice.... gotta figure out what's happening with mine. my LGS supposedly sent it in over a month ago.

                      Comment

                      • #26
                        MisplacedTexan
                        Senior Member
                        • May 2012
                        • 706

                        I like my 9mm, wish the 45 was on the roster as well.

                        Thanks for the update - nice quick response from them!

                        Comment

                        • #27
                          bigbearbear
                          Calguns Addict
                          • Jun 2011
                          • 5378

                          Originally posted by jcalabria
                          UPDATE:
                          I opened a case with Beretta on 9/3, received a reply the following day suggesting that I return the firearm to Beretta so they could assess the situation. I filled out the return form online and a pickup was scheduled. The firearm was shipped off on 9/5 and arrived at Beretta, MD on 9/9. Received notification on 9/12 that firearm was on its way back to me. I received the gun today, and according to the packing list the following was done:

                          "Pre and safety check. Noted customer's concern. Initial test fire confirmed stove piping issues. Replaced hammer group. Repeat test fire 30 rounds 115 grain Black Hills JHP testing customer's magazines without malfunctions noted."

                          Less than a week and a half turnaround, not bad at all. I can't wait to get it back out and put some rounds though it. All in all I am extremely happy with Beretta's customer service and extremely fast turn around.
                          Good to hear its been resolved.

                          I too have a problem with my PX4 Storm 9mm but I don't think its something their service center can help me with. My problem is that the gun is so nice to shoot I'm chewing through ammo at a very alarming rate!

                          I try to slow down but I'm shooting my 9mm ammo at a rate of around 150 rounds an hour in the indoor range. Maybe I need to leave the speed loader at home next time...

                          Comment

                          • #28
                            das boots
                            Member
                            • Jul 2013
                            • 179

                            Originally posted by Tommy C
                            This is strange, OP. I've run over 4000 rounds through my PX4 40S&W & have never had a malfunction of any kind. IMO, the PX4's have Glock-like reliability. Who knows, maybe you have a bad one....
                            +1. I also have the PX4 Storm .40 S&W. Flawless. In fact, I love the gun. It might not be the right gun for target shooting at 35 yds. which I do with my 1911. But at closer range....let's say 25 ft. it has excellent grouping. And I was using reloads.

                            I just might upgrade my rear sights with an aftermarket adjustable sights and install a Burris FF III.
                            NRA Life Member

                            Comment

                            Working...
                            UA-8071174-1