Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Sig Sauer E2 upgrade kit
Collapse
X
-
how did you scratch up the grip? you dont need any tools but the one given by sig. i hope you didnt use a flat head screw driver. i can take off my grips within 10 seconds. all you need to do it turn it upside down, magwell pointing up. use the tool to push out one side of the grip out. take your finger and stick it in that gap. now push out the other side.. and pull the whole grip toward the back. after that it should just all come out.Comment
-
-
Thank you for this info, 9mmepiphany. I will change the parts out.That mainspring boot has been around for a long time, that was the one that replaced the bent L-shaped metal mainspring seat. That boot/strut is what interferes with the E2 grips
Here is a comparison picture. The E2 parts are on the left, note the shorter boot and the different contour/length of the mainspring strut

Initially, I thought that since the grip fits and the hummer drops, it shouldn't be an issue.
Comment
-
Guilty, not a screwdriver but something similar.how did you scratch up the grip? you dont need any tools but the one given by sig. i hope you didnt use a flat head screw driver. i can take off my grips within 10 seconds. all you need to do it turn it upside down, magwell pointing up. use the tool to push out one side of the grip out. take your finger and stick it in that gap. now push out the other side.. and pull the whole grip toward the back. after that it should just all come out.
Comment
Calguns.net Statistics
Collapse
Topics: 1,870,936
Posts: 25,177,613
Members: 358,862
Active Members: 5,392
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 39149 users online. 34 members and 39115 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment