Any suggestions on how to "blue" a SS Wolf barrel?

[Afterburnt]

I don't really like the SS look of Wolf SS barrels in my Glocks. It is not really important but I wanted to know if one of those blue pens or something would work on the visible parts of my Wolf Glock barrels, especially my two tone 29, I think the tri-tone is kindda funky looking.

Thanks

[morrcarr67]

I wouldn't use a "bluing" pen. But, I might try using some Birchwood Casey Super Blue Liquid Gun Blue.

[bohoki]

what ever you use will probably rub off in wear patterns after a few shots

and you will wish it was all consistant again unless you have a sig 226 and want the wear to match

[xxINKxx]

Lone wolf can coat it black Oxide finish (like the factory glock barrel color) for $25. They send out batches once a month and takes 4 - 6 weeks. I read it on there site. I'm assuming getting that or something similar is the only thing that's gunna turn out good and not wear out

[slick_711]

Lone wolf can coat it black Oxide finish (like the factory glock barrel color) for $25. They send out batches once a month and takes 4 - 6 weeks. I read it on there site. I'm assuming getting that or something similar is the only thing that's gunna turn out good and not wear out

+1 That's your best option. Stainless steel can't be blued. There are a few finishes that will stick, but having Lone Wolf do it for you is the cheapest/easiest route.

[kayaker]

[swrdply400mrelay]

Would something like this work?

http://www.brownells.com/.aspx/pid=1117/Product/ALUMA_HYDE_reg__II

[Afterburnt]

I just put in my order to lone wolf, I will call them tomorrow just to make sure. Their site says they can oxide their barrels for like 25 bucks. maybe I will send my other barrels back and have them do the same to them?

[Afterburnt]

Would something like this work?

http://www.brownells.com/.aspx/pid=1...A_HYDE_reg__II

I want to try that on a shotgun, after I strip the hi temp engine paint off of it.