help with glock trigger problem

[jerryballs]

I have a glock 17 that has an interesting trigger malfunction. when I fire a round and the trigger is trapped when releasing to the reset the gun fires upon reset. Its a very odd feeling. It doesn't do it all the time but does it 50% of the time...

I have a glockworx drop in trigger in there and I have installed many before and it was working fine before so there is a failure or defective part somewhere.

help...

Jerry

[HighLander51]

You need to contact GlockWorx,

[jdg30]

Changing back to the stock factory trigger will fix the problem.

[jerryballs]

Changing back to the stock factory trigger will fix the problem.

yes..most likely..thanks

[jerryballs]

You need to contact GlockWorx,

yeah I think thats the plan, I wasn't sure if this was typical of a broken spring or something...I thought I would ask first.

[IPSICK]

Contact Glockworx. I'm thinking there may be an issue with the overtravel adjustment. It's my least favorite mod on Glock triggers.

[zipman5150]

Try using your factory connector with the glockworx system... see if that works

[IPSICK]

I'd say use the factory ejector housing or back out the overtravel screw all the way.

[locosway]

I'd play with the travel screws first, but you probably want to contact Glockworx also just to confirm it's not a malfunction and just a setup issue.

[duc748bip]

Rememner those little set screw need loc-tite to stay put.

[jerryballs]

update..Called glockworx and they suggest that it may be debris in the striker channel. So I am going to clean, test, then test fire.

Thanks for all the input

[BigFatGuy]

A Glock misbehaving due to being... dirty?

I have to admit, I never thought I'd hear that around here.

[locosway]

A Glock misbehaving due to being... dirty?

I have to admit, I never thought I'd hear that around here.

Aftermarket trigger, all bets are off...

[IPSICK]

Aftermarket trigger, all bets are off...

True that. Glocks can be like PC's sometimes. You can keep doing upgrades until a malfunction and then you have to start uninstalling each addition until you get back to reliable functioning.

[jerryballs]

True that. Glocks can be like PC's sometimes. You can keep doing upgrades until a malfunction and then you have to start uninstalling each addition until you get back to reliable functioning.

^this