Glock 19 FTF

[BONECUTTER]

10 round mags are tight. With 10 in and the slide closed it going to add resistance to the slide and slow it down. Hence your FTF. Slower slide and an already tight 10th round will not come out easily.

[Katana]

I wouldn't mess with the feed ramp yet. Load 10 rounds in the mag, chamber a round and keep firing (100 to 200 rounds). Firing ball ammo will smooth out the feed ramp.

Of course, use all your mags. Mags can need breaking in too. If you find only one mag is causing the problem, put a bunch of rounds through it. If that doesn't work, send the mag back to Glock.

[m1match]

Glock 10 rd mags are so tight that if they are inserted in the magwell with 10 rds in the mag, they are putting a lot of upward pressure on the slide. I think in your case, the Blazer brass ammo, which is a little on the soft side, combined with the drag imposed on the slide by the upward pressure of the top round in the mag is causing your issues. Glocks never need work on the feed ramps, they are good to go from the factory. Like was suggested, I think if you load 9 rounds the issue will go away. Also if you use hotter ammo, the issue might go away.

[Katana]

Also, you might want to try loading up your mags and leaving them loaded.

The pressure over time can help to slightly stretch the lips upward, which improves the feeding angle.

[Pryde]

This is a common issue with older Glock 10 round magazines: the first round feeds and the second nosedives. Upgrade your followers and the problem will be solved.

[Greg-Dawg]

Glock 10 rd mags are so tight...

Try 33 rounders.

[tbhracing]

I know this isnt an answer, but both of my Glocks (17,19) only have problems with WWB and ONLY WWB. I have fired almost everything else in them- Remington green/white, geen box, Mag Tech and PMC.

Both of them just dont like WWB.

If not the magazines, maybe the ammo?

[Baconator]

I traded a fellow calgunner and picked up some Federal HP's. I'll see how it likes those.

[walter]

THIS HAPPEN TO ME BEFORE, ITS NOT LIMP WRISTING.

CHECK THE MAGAZINE FOLLOWERS, IF IT 2183, ITS THE MAG.

i send to glock and they replaced with 9mm3 followers. you want to use 9mm, 9mm3, or 9mm4 followers.

[walter]

yes my glock 19 was brand new too. they shipped it with some bs mag followers because when i sent the mags back, they replaced them.

[Baconator]

How did you go about contacting Glock? The 2 that came with the gun, along with 4 more that I bought are all 2183-1's. I have only 2 mags that are 9mm3.

[KevinXT]

Also, you might want to try loading up your mags and leaving them loaded.

The pressure over time can help to slightly stretch the lips upward, which improves the feeding angle.

This^


keep the mags loaded in the safe and shoot the gun more the problem should go away. when i first got my glock 17 it was so hard to get the 10th round in the mag.. even with the loader. now i can load it with my fingers no problem. and my glock 17 fires everything i feed it every time!