Glock finger groove removal

[Twist18]

[tdp113530]

Its easy to do yourself. Just go slow. Don't get impatient.

[Notpc]

Just buy a smooth trigger shoe and replace it. I did my gen 3 G26 in about 10 minutes.

[Twist18]

Its easy to do yourself. Just go slow. Don't get impatient.

[Twist18]

Just buy a smooth trigger shoe and replace it. I did my gen 3 G26 in about 10 minutes.

[bohoki]

I probably would do it myself, but I don’t have a vise, or any good way to secure the frame while I sand it.

i think a file makes a cleaner cut

but i've never done it but i have sanded polymers and they get kind of fuzzy

this looks like it would work

https://www.homedepot.com/p/OLYMPIA-3-in-Clamp-Vise-38-603/205149970

[deadcoyote]

[static2126]

Very easy to do yourself. Otherwise cold bore customs in tx is awesome

[Twist18]

Very easy to do yourself. Otherwise cold bore customs in tx is awesome

[static2126]

True but there is such a thing as quality of work. Lane does a really nice job

[Notpc]

Oops, sorry. I can't help with that, never felt the need.

[C.Bronson]

Hello!
Where in Eureka?
Pacific Outfitters?
Thanks

[Munny$hot]

Be extremely careful when shaving off the finger groves on a Gen3. Removing the ledges are fine, but if you grind off the knurling and stipple the front strap it's gets extremely thin and you can eaisly poke through the front strap.

[MyOdessa]

You can pick up decent vise at harbor freight and go low rpm's with dremel. Leave enough to hand finish it.

[Che762x39]

I'll be the first to comment on the Emperor's New Clothes.

Don't do it. Glock Gen 3 is to resolve the issues of getting a good grip that Gen 1 and Gen 2 lacked. Back in the day people got Hogue grips so they can get a better grip. You will also cut your resale value by 50%. JMHO