Why did you change the grips on your 1911?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
OOPS!
Collapse
X
-
The original LB grips were too smooth, almost like old furniture. I'll see if I can dig out some pics with them on there. I needed something with a bit more bite. Tried some old VZ's I have on hand, but didn't look 'right'. I shot a fellow Calgunners Pro and noticed how much better they filled my hands, so I ordered a pair from SA. Look good, feels good and grippy.
ETA: Took some new pics (odd, can't post pics via Tapatalk???). So, sorry to have to use attachments.Les Baer 1911: Premier II w/1.5" Guarantee, Blued, No FCS, Combat Rear, F/O Front, Checkered MSH & SA Professional Double Diamond Grips
Springfield Armory XD-45 4" Service Model
Springfield Armory XD9 4" Service Model (wifes).
M&P 15 (Mine)Comment
-
In 20 years of owning Glocks, shooting Glocks, experimenting with various triggers, springs, connectors, sights, mag extensions etc. both OEM and aftermarket I never experienced or even heard of this particular problem.Similar scenarios happen with any gun. You can wedge parts together at a slightly wrong angle with lots of machines. Typically it would be a new user or someone who is being overly cautious that gets worried and timid about yanking it apart - not at all a bad thing. But with a Glock it is pretty hard to EFF something permanently. Common sense will always prevail after you get a feel for how tough a Glock is. They are simple and easy, insanely popular for a reason, copied by everyone for a reason. Drink the Kool Aid.
This is a new G19 I just picked up a couple weeks ago, didn't even look at it until Black Friday before heading to the range. First thing I noticed was the envelope with the test fired empty cases was missing. Upon removing the slide, saw that the usual copper grease was was not in place on the rails; what was left was dried out along the slide grooves. There was powder residue inside the slide under the extractor and some brass printing on the breechface, but the barrel was clean and shiny like an oiled patch had been run thru it.
Of course, I thought 'this is not a new pistol. This took a detour somewhere along the way.' First instinct was to immediately take it back to the gunshop, but after thinking it thru decided not to so I cleaned and lubed it and took it to the range, put 100 rds thru it, worked perfectly.
So, I've now had two anomalies with this particular Glock, the oddity out of the box and this reassembly malf.California Native
Lifelong Gun Owner
NRA Member
CRPA Member
....."He has erected a multitude of New Offices, and sent hither swarms of Officers to harrass our people, and eat out their substance."
Declaration of Independence, 1776Comment
-
I mean it is not a malf or problem. It is a user getting the slide onto one end of the inserts and not on the other end... personally I don't recall it happening with a G19, but I have lots of long slides... 17L, G41, G40 where it seems like it would be more likely to happen. When it happens to me it isn't wedged on there where I have to get a hammer. I simply reverse the direction of the slide, take it back off the frame and redo, pushing down (maximum effort) and slide it back on till the next time I am not paying particularly much attention to the task at hand. Glocks are so simple you really don't have to look at it to assemble it - especially removing and reinstalling the slide.
Another example is when lots of users put their Ruger .22 pistols together incorrectly and the charging handle/bolt will not activate... or when someone doesn't line up the BCG correctly in the CH of an AR-15 and can't figure out why they can't get the upper back together, or when you close the hood of your car or trunk and do not engage the latch 100%, etc... user error.
Something like a CZ or 1911, there's a lot more that the user can EFF up. IMHO.Comment
-
Exactly. Glocks are ingeniously simple and in hundreds of disassemblies/reassemblies I'd never had this happen before. In light of the condition when I first unpacked it, gave me pause.I mean it is not a malf or problem. It is a user getting the slide onto one end of the inserts and not on the other end... personally I don't recall it happening with a G19, but I have lots of long slides... 17L, G41, G40 where it seems like it would be more likely to happen. When it happens to me it isn't wedged on there where I have to get a hammer. I simply reverse the direction of the slide, take it back off the frame and redo, pushing down (maximum effort) and slide it back on till the next time I am not paying particularly much attention to the task at hand. Glocks are so simple you really don't have to look at it to assemble it - especially removing and reinstalling the slide.
Another example is when lots of users put their Ruger .22 pistols together incorrectly and the charging handle/bolt will not activate... or when someone doesn't line up the BCG correctly in the CH of an AR-15 and can't figure out why they can't get the upper back together, or when you close the hood of your car or trunk and do not engage the latch 100%, etc... user error.
Something like a CZ or 1911, there's a lot more that the user can EFF up. IMHO.California Native
Lifelong Gun Owner
NRA Member
CRPA Member
....."He has erected a multitude of New Offices, and sent hither swarms of Officers to harrass our people, and eat out their substance."
Declaration of Independence, 1776Comment
-
California Native
Lifelong Gun Owner
NRA Member
CRPA Member
....."He has erected a multitude of New Offices, and sent hither swarms of Officers to harrass our people, and eat out their substance."
Declaration of Independence, 1776Comment
-
I have had to remove the slide cover plate a few times too. IIRC if you do something silly (some would say stupid) like use a fitted Ghost Connector where you have to remove it each time you do an adjustment to get the connector where the trigger will just reset... other things can cause the trigger to be locked in a position where the slide won't come off unless you remove the plate, but there is always a way, and even that only takes minute with a Glock.Comment
-
AHA! I didn't know that about the Ghost connectors. Always used Glock factory parts for the internals with the exception of the time I popped about $150 for a Skimmer trigger assy for a G17. Sorely disappointed, the improvement was miniscule over the stock parts.I have had to remove the slide cover plate a few times too. IIRC if you do something silly (some would say stupid) like use a fitted Ghost Connector where you have to remove it each time you do an adjustment to get the connector where the trigger will just reset... other things can cause the trigger to be locked in a position where the slide won't come off unless you remove the plate, but there is always a way, and even that only takes minute with a Glock.California Native
Lifelong Gun Owner
NRA Member
CRPA Member
....."He has erected a multitude of New Offices, and sent hither swarms of Officers to harrass our people, and eat out their substance."
Declaration of Independence, 1776Comment
-
I steer clear of Ghost, but I had tried a few when I got my first Glock. I like the TTI and ZEV connectors and of course the factory minus.
The Ghost I was referring to was one you have to grind, sand, dremel yourself to get it to JUST fit to your gun. Machining to JUST BARELY let the striker release is not a great idea proven by function checks. I don't want to hand fit anything on a Glock. Even if you use something a lot of people rave about like a TTI... test test test in your gun. Dry fire and reset a lot... and then fire it and test reset a lot at the range. I've seen some weird things with connectors. I do not doubt weird things can happen with any connectors because QA/QC - even GLOCK brand. I've personally never seen a stock connector let loose the striker on reset, fail to fire, or lockup the trigger - just aftermarket. I've seen really nice smooth feeling connectors where the trigger is pulled and held in to "ride reset" and if you release just a bit the gun fires again.
They are machines... and can be adjusted wrong, etc...
My H&K Expert trigger overtravel adjustment can be set so that it removes all overtravel and will drop the hammer, but not every time. You don't want to adjust all the overtravel out of it... you back it off a bit or it will not always have enough travel to fire. Things shift with recoil. Test test test.Last edited by crufflers; 12-03-2018, 3:24 PM.Comment
-
Arf! That's way above my paygrade, into Glock armorer territory I think. Although I don't know that a Glock armorer would venture that deep into aftermarket territory.California Native
Lifelong Gun Owner
NRA Member
CRPA Member
....."He has erected a multitude of New Offices, and sent hither swarms of Officers to harrass our people, and eat out their substance."
Declaration of Independence, 1776Comment
-
-
California Native
Lifelong Gun Owner
NRA Member
CRPA Member
....."He has erected a multitude of New Offices, and sent hither swarms of Officers to harrass our people, and eat out their substance."
Declaration of Independence, 1776Comment
-
Yup that's what I said, not a good idea.
It is standard in the instructions for a Ghost Ultimate Connector or whatever they call it. I could have ground mine a bit more and probably got it to release the striker (not unlike any over travel adjustment in some ways). I chose to toss it and go to a minus or TTI.
Might have been this one unless they have more than one that requires "Minor fitting"
GHOST INC. EVO ELITE COMPLETE Trigger Kit for Glocks GEN 1-5 by Ghost Inc. Aftermarket Glock parts and Glock accessories by Ghost Inc triggers, connectors, baseplates, and slide releases
I have no Ghost connectors in my guns or anything that was Dremeled AFAIK
I ordered what I thought was a drop-in and was not, I fitted it since I had it then decided removing any surface material is bad even if the overtravel was gone. Certainly is or was part of their regular line up.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,677
Posts: 25,174,888
Members: 358,862
Active Members: 5,389
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 23793 users online. 76 members and 23717 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment