Which XD Trigger?

[armygunsmith]

I agree with zesty, shoot the pistol first. Don't make your decision on just your first time out either. The trigger does get some getting used to a first, i think you'll get used to it. As a side note, i purchased my XD for carry. What really sold me was the grip safety. Here's my logic on the decision, when i re-holster the pistol, i put the thumb of my firing hand on the striker indicator. This makes two things clear. The first being that i know that the weapon is cocked, but more importantly, the grip safety disengages making it nearly impossible for the pistol to go off while re-holstering. If you look around read about some accidental discharges while holstering which is easily avoided by training and using the holstering technique i described. You'll love your XD.

[Gryff]

are there any other suggestions for trigger work besides Springer Precision?

Canyon Creek did both of my competition guns. Rich does great work.

You can also achieve about 85% of a custom trigger job yourself with something like the Powder River trigger kit. Their Match Target Easy Fit kit reduces take-up, reset, and reduces trigger pull weight. Their Easy Fit kit reduces the take-up and reset, but doesn't affect the weight. The nice thing about these kits is that you don't have to send the gun in to do it. For me, that is about an $85 savings since sending a gun across the country is freakin' expensive these days.

[lioneaglegriffin]

thanks for the advice. i'll try it out factory trigger, but i will decrease the reset for sure.

[Gryff]

thanks for the advice. i'll try it out factory trigger, but i will decrease the reset for sure.

Go with an open mind. The reset is long when compared to a Glock, but it isn't Hell on Earth. The XD is a great gun. There is room for improvement, but definitely get some rounds down range with the factory parts before upgrading. If nothing else, it will give you a point of reference to appreciate the money you spent on the upgrades.

[lioneaglegriffin]

Go with an open mind. The reset is long when compared to a Glock, but it isn't Hell on Earth. The XD is a great gun. There is room for improvement, but definitely get some rounds down range with the factory parts before upgrading. If nothing else, it will give you a point of reference to appreciate the money you spent on the upgrades.

good point, knowing how crappy your grass was before you import in some St. Augistine in the whole grass is greener on the other side scheme of things.

[3GunFunShooter]

Canyon Creek for my tirgger job. I had mine done 4 years ago by Rich, still runs like new. Back then there as fewer choices.
I would never use this XD for a HD gun due to the light trigger.

[lioneaglegriffin]

Canyon Creek for my tirgger job. I had mine done 4 years ago by Rich, still runs like new. Back then there as fewer choices.
I would never use this XD for a HD gun due to the light trigger.

how many pounds would you feel comfortable with for HD?

[M. Sage]

my only concern is as to whether the competition trigger would make it unsafe to carry or does it not matter. if not then i will get it.

thanks for your help.

IMO, if it's meant for competition, it's not something you'll want to use for daily carry.

There's a reason triggers in military firearms are so stiff. When adrenaline hits, your fine motor skills go all to poop. If you don't have a fairly stiff trigger, you're going to shoot when you don't you mean to.

I'd stick with the stock trigger and see how bad it really is. I'm a fan of single-action pistols, but can deal with double-action and striker pistol triggers.

[Californio]

Stock trigger is fine, spend the money on an NRA Instructor to teach you the proper grip and shooting stance

[cineski]

Personal experience, the Powder River Precision Match Target kit is perfect. The stock trigger is a bit long, mushy, lots of take-up even after a lot of rounds through it. I bought the Match Target kit because I could take a spring out to make it a combat trigger, so you can have 2 variations. It is quite superior to the stock trigger. Fact is, I see absolutely no harm in the Match Trigger as a carry/HD trigger. I was afraid it would be too light, but it wasn't. It's just right. However, you can make that decision for yourself. It's also pretty cheap at $64 shipped and Dan is a nice guy.

http://www.powderriverprecision.com/

[3GunFunShooter]

For a gun I would be using for HD, stock only. If you have to use it, no matter what or why, you are going to need a lawyer.

[lioneaglegriffin]

IMO, if it's meant for competition, it's not something you'll want to use for daily carry.

There's a reason triggers in military firearms are so stiff. When adrenaline hits, your fine motor skills go all to poop. If you don't have a fairly stiff trigger, you're going to shoot when you don't you mean to.

I'd stick with the stock trigger and see how bad it really is. I'm a fan of single-action pistols, but can deal with double-action and striker pistol triggers.

great insight good to know.

[mango salsa]

sorry, a housekeeping question, how do you guys find posts you've previously made on here? im new to this site and find the threads i've posted in. thanks.

Nevermind, someone was kind enough to PM me and show me how to do this.

[cineski]

While I totally agree with what's been stated, the Match Trigger job isn't exactly crazy light. It feels like 4.5-5 lbs. It's just shorter and crisper than stock. It's definitely not a hair trigger and takes a deliberate pull. You can buy the match trigger and choose to not change the springs.

[lioneaglegriffin]

While I totally agree with what's been stated, the Match Trigger job isn't exactly crazy light. It feels like 4.5-5 lbs. It's just shorter and crisper than stock. It's definitely not a hair trigger and takes a deliberate pull. You can buy the match trigger and choose to not change the springs.

That sounds like an option, i just want balance. to be able to get a round off quickly without compromising safety.