Unconfigured Ad Widget

Collapse

Recomemdation on "Sight Pusher" tools.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • newbie1234
    Veteran Member
    • Feb 2016
    • 3120

    Recomemdation on "Sight Pusher" tools.

    I need the recommendation for a "Universal front and rear sight pusher/adjuster" tools for the following pistols:
    - S&W SD9VE
    - FMK 9C1 Gen2
    - CZ 75B, 75 Compact
    - Beretta 84FS
    - Sig 2022
    - Glock 19
    - Bersa Thunder
    - 1911
    - Since it a universal tool so it can do more model .......

    (BTW, I don't own all of those pistols above, those are combined of my friends and I).
  • #2
    osis32
    Calguns Addict
    • Jul 2009
    • 5912

    There was just a thread on this. I haven't tried this one mine was more expensive but I'm not entirely pleased with it. May get this one


    Just a libertarian guy in a Leftist Authoritarian state.

    Comment

    • #3
      shafferds
      Senior Member
      • Feb 2008
      • 1970

      Alot of the universal ones don't work well. I have two different ones and m&p sights and xd sights are a royal pain to get off.

      Comment

      • #4
        Germ1
        Senior Member
        • Apr 2014
        • 1165

        brass punch and a plastic hammer+ a vice. Will work on every firearm ever invented.

        Comment

        • #5
          Citadelgrad87
          I need a LIFE!!
          • Mar 2007
          • 16900

          I have never regretted buying a well made tool, or a tool that is expensive.

          I absolutely HAVE regretted trying tasks without the proper tool. Ive seen threads where guys broke sights, marred finishes, gouged slides using punches and poorly made universal tools.

          I've never heard of anyone tearing up a firearm using an MGW tool.

          MGW makes excellent sight tools. They make a universal one, but it's about $300, I think.

          I have one for Sigs and one for 1911 rears. If I was contemplating being able to do more than four types, I'd spring for the MGW universal.

          I did buy a "universal" one off eBay, it doesn't work well on anything I tried it out on. The MGW just clamps to the slide and you turn the handle.
          Last edited by Citadelgrad87; 07-18-2016, 5:37 PM.
          Originally posted by tony270
          It's easy to be a keyboard warrior, you would melt like wax in front of me, you wouldn't be able to move your lips.
          Originally posted by repubconserv
          Print it out and frame it for all I care
          Originally posted by el chivo
          I don't need to think at all..
          Originally posted by pjsig
          You are talking to someone who already won this lame conversation, not a brick a wall. Too bad you don't realize it.
          XXXXXXXXXXXXXXXXXXXXXXX
          sigpic

          Comment

          • #6
            newbie1234
            Veteran Member
            • Feb 2016
            • 3120

            Originally posted by Germ1
            brass punch and a plastic hammer+ a vice. Will work on every firearm ever invented.
            BRASS punch heh! Thanks, I never thought about it. Thanks again.

            Comment

            • #7
              Old4eyes
              Senior Member
              • Feb 2010
              • 1752

              Check out the Maryland Gun Works (MGW) Sight-Pro. Look to see if there is a shoe specific to the the model of pistol you are interested in. I have the original version which came with a straight blade mover and had a slanted blade mover as an option. The new version includes both straight and slanted.

              The shoe for the CZ is slightly different than others and you mount the slide a little differently than others, the instructions for that difference come with the CZ specific shoe.
              Send Lawyers, Guns and Money - On second thought, hold the Lawyers.

              Comment

              • #8
                _TomT_
                Veteran Member
                • Jun 2013
                • 3354

                Originally posted by Germ1
                brass punch and a plastic hammer+ a vice. Will work on every firearm ever invented.
                3/16 HEX sockets for Glocks.

                Comment

                • #9
                  Packy14
                  Calguns Addict
                  • Jul 2008
                  • 5312

                  Originally posted by newbie1234
                  I need the recommendation for a "Universal front and rear sight pusher/adjuster" tools for the following pistols:
                  - S&W SD9VE
                  - FMK 9C1 Gen2
                  - CZ 75B, 75 Compact
                  - Beretta 84FS
                  - Sig 2022
                  - Glock 19
                  - Bersa Thunder
                  - 1911
                  - Since it a universal tool so it can do more model .......

                  (BTW, I don't own all of those pistols above, those are combined of my friends and I).

                  Your friends have a lot of junk guns lol
                  NRA Lifetime Member

                  1A-2A = -1A

                  Comment

                  • #10
                    _TomT_
                    Veteran Member
                    • Jun 2013
                    • 3354

                    Originally posted by Packy14
                    Your friends have a lot of junk guns lol
                    Now you've done it...

                    Comment

                    • #11
                      Germ1
                      Senior Member
                      • Apr 2014
                      • 1165

                      Originally posted by Citadelgrad87
                      I have never regretted buying a well made tool, or a tool that is expensive.

                      I absolutely HAVE regretted trying tasks without the proper tool. Ive seen threads where guys broke sights, marred finishes, gouged slides using punches and poorly made universal tools.

                      I've never heard of anyone tearing up a firearm using an MGW tool.

                      MGW makes excellent sight tools. They make a universal one, but it's about $300, I think.

                      I have one for Sigs and one for 1911 rears. If I was contemplating being able to do more than four types, I'd spring for the MGW universal.

                      I did buy a "universal" one off eBay, it doesn't work well on anything I tried it out on. The MGW just clamps to the slide and you turn the handle.
                      This is why I said brass bunch. A brass punch won't ruin the firearm, pretty basic stuff here guys. You're all getting ripped off by buying these dumb sight pushers.

                      A brass punch is the right tool for the job. You all talk like you've never worked on a firearm before.

                      Wrong video, here is the right one. This is how it's done.
                      Last edited by Germ1; 07-18-2016, 6:34 PM.

                      Comment

                      • #12
                        Germ1
                        Senior Member
                        • Apr 2014
                        • 1165

                        Originally posted by _TomT_
                        3/16 HEX sockets for Glocks.
                        Only for the front sight. I have a little wrench I bought for like 5 dollars specifically made for that.

                        Comment

                        • #13
                          AGFNTB
                          Senior Member
                          • Jan 2014
                          • 804

                          I bought the MGW Sight Pro and must say I don't regret the spend. Fully adjustable and does not mar the firearm.

                          Comment

                          • #14
                            madoka
                            Senior Member
                            • Dec 2012
                            • 2039

                            Originally posted by Packy14
                            Your friends have a lot of junk guns lol
                            Hey now. . . I also own all those guns except for the Bersa.

                            I'd like to add to the MGW Sight Pro recommendations. Buy once. Cry once.

                            Comment

                            • #15
                              BoJackUSMC
                              Calguns Addict
                              • Aug 2010
                              • 7091

                              I went with MGW tools... buy proper tools for proper job.

                              Comment

                              Working...
                              UA-8071174-1