question on zeroing. 1-6acss

[19K]

I don't have access to an outdoor range at the moment so I will be using an indoor range.

Its 50 feet long, any suggestions for getting it close to zero at that distance? Like a couple inches low or high from the center at that range?

I have a 1/7 twist on a 16 inch barrel will be using 55 grain PMC.

I can verify at an out door range in a month or so.

[PrimaryArms]

I don't have access to an outdoor range at the moment so I will be using an indoor range.

Its 50 feet long, any suggestions for getting it close to zero at that distance? Like a couple inches low or high from the center at that range?

I have a 1/7 twist on a 16 inch barrel will be using 55 grain PMC.

I can verify at an out door range in a month or so.

-1.65" low but you ll need to really 0 it at some point

Dimitri

[19K]

I will, the closest outdoor range with no fees or regulation as far as ammo goes, is closed for fire season and will(should) be open in about 6 weeks. Thanks for your help.

[Gene1986]

↑ where is this place located?

[PrimaryArms]

I will, the closest outdoor range with no fees or regulation as far as ammo goes, is closed for fire season and will(should) be open in about 6 weeks. Thanks for your help.

No problem get a 1" low zero at 50 yards then move to 100. Be sure you mounted scope level and that you are shooting level. There are anti cant devices you can buy. I use them and they increase accuracy dramatically.

Dimitri