3x Magnifer paired with SPARC Height Question.

[boxcutter3005]

Hi there, I was wondering, if I have a vortex sparc already on my AR, with the tall riser, and I order a PA 3x Magnifier, will the standard PA FTS mount be tall enough? or would I need something else? Thanks

[PrimaryArms]

Can you measure it so we can check?
Thanks
Dimitri

[boxcutter3005]

The riser is ~26mm and the center of the red dot on this riser is ~36mm

[marsh1]

The riser is ~26mm and the center of the red dot on this riser is ~36mm

Is that 36mm above the top of the rail. I fit is that is a little lower than normal absolute cowitness. Our standard magnifier mount for sure. With the tall riser I was thinking it was more like 1.6". We measure from the top of the rail to the center of the sight window.

Marshall

[boxcutter3005]

Is that 36mm above the top of the rail. I fit is that is a little lower than normal absolute cowitness. Our standard magnifier mount for sure. With the tall riser I was thinking it was more like 1.6". We measure from the top of the rail to the center of the sight window.

Marshall

Thanks Marshall, my measure might have been off, so I'll think about it and probably give the standard mount a try.

EDIT: Oh your 3x magifiers seem to be out of stock, do you expect to have more in? I would like to know when I should check back

[PrimaryArms]

Should be in Friday

Dimitri