Unconfigured Ad Widget

Collapse

Too many threads going in the same direction

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sigstroker
    I need a LIFE!!
    • Jan 2009
    • 19991

    Too many threads going in the same direction

    I'm having a silencer problem. Too many threads going in the same direction.

    There's a muzzle device, a QD for the can, and a coupler on the bottom of the silencer that can be changed. Theoretically, the QD should have the least resistance. It's only got a spring and detent holding it on, the other stuff depends on friction. Or a threadlocker?

    When it's all assembled, unscrewing the can from the rifle unscrews the muzzle device. Even if I manage to get a wrench on the muzzle device, the coupler on the bottom of the silencer unscrews.

    There's some beach-sandy crap in the can. I guess that's Rocksett from the coupler? It didn't work, at least not long enough.

    Ideas? Solutions from you silencer veterans?
  • #2
    dousan
    Senior Member
    • Feb 2010
    • 1291

    Comment

    • #3
      sigstroker
      I need a LIFE!!
      • Jan 2009
      • 19991



      YHM QD muzzle brake, very coarse thread.



      YHM Resonator R2. Muzzle brake screws onto the barrel.

      The "coupler", thing on the right, screws into the bottom of the silencer, then the silencer screws onto the muzzle brake.

      Comment

      • #4
        dousan
        Senior Member
        • Feb 2010
        • 1291

        Comment

        • #5
          sigstroker
          I need a LIFE!!
          • Jan 2009
          • 19991

          Can't put a socket to anything so I don't see how you can get a good torque value.

          Comment

          • #6
            dousan
            Senior Member
            • Feb 2010
            • 1291

            German spec torque

            Comment

            • #7
              beanz2
              I need a LIFE!!
              • Nov 2008
              • 12035

              to clamp the can in a vise, then tighten the QD adapter using the provided wrenches.




              My fav suppressor tool is the Warren Innovative Technologies mounting tool
              sigpic
              The wife will be pissed, but Jesus always forgives.

              Comment

              • #8
                sigstroker
                I need a LIFE!!
                • Jan 2009
                • 19991

                Originally posted by beanz2
                to clamp the can in a vise, then tighten the QD adapter using the provided wrenches.




                My fav suppressor tool is the Warren Innovative Technologies mounting tool
                Nice looking tool. If I ever get a vise, and a place to mount it, I'll think about getting one.

                Use Rocksett if you need. That stuff dissolves or softens when soaked in water, you can still move it to another can later.
                The sketchy looking thing is it looked like it had Rocksett already, the sandy looking stuff. And it came loose pretty easily. Maybe it has a short lifespan.

                Comment

                • #9
                  beanz2
                  I need a LIFE!!
                  • Nov 2008
                  • 12035

                  Originally posted by sigstroker
                  Nice looking tool. If I ever get a vise, and a place to mount it, I'll think about getting one.
                  If you don't have the room for a workbench, consider getting one of these Black and Decker WorkMates. They're very handy and folds up to a small footprint.



                  The Vox Block could be clamped directly by the WorkMate table without a vise.


                  Originally posted by sigstroker
                  The sketchy looking thing is it looked like it had Rocksett already, the sandy looking stuff. And it came loose pretty easily. Maybe it has a short lifespan.
                  I've never seen, heard or read Rocksett deteriorate into sand like material. Doubt that stuff was Rocksett.
                  sigpic
                  The wife will be pissed, but Jesus always forgives.

                  Comment

                  • #10
                    sigstroker
                    I need a LIFE!!
                    • Jan 2009
                    • 19991

                    Originally posted by beanz2
                    If you don't have the room for a workbench, consider getting one of these Black and Decker WorkMates. They're very handy and folds up to a small footprint.



                    The Vox Block could be clamped directly by the WorkMate table without a vise.




                    I've never seen, heard or read Rocksett deteriorate into sand like material. Doubt that stuff was Rocksett.
                    Using something that size will have to wait until I get a bigger house. Which is fine, I won't be ready to shoot any .30 cals until then anyway.

                    Comment

                    • #11
                      beanz2
                      I need a LIFE!!
                      • Nov 2008
                      • 12035

                      Originally posted by sigstroker
                      Using something that size will have to wait until I get a bigger house. Which is fine, I won't be ready to shoot any .30 cals until then anyway.
                      sigpic
                      The wife will be pissed, but Jesus always forgives.

                      Comment

                      Working...
                      UA-8071174-1