Need some help

[noah42]

I just picked up a tikka t3x lite and a zeiss conquest hd5 50mm scope. Did a little research prob not as much as I should have. Any thoughts on the set up? Also need some help on scope rings and size?


Sent from my iPhone using Tapatalk

[Divernhunter]

You have it now so you might as well make the best of it. Probably need Med rings since it is 50mm

[tony270]

Your going to need a cheek raiser with a 50mm lens.

http://www.tikka.fi/rifles/tikka-t3x/t3x-lite-adjustable

[tony270]

Also if you practice enough to find your cheekweld by reflex and mussel memory you'll be okay. You need to get the rings and mounts that set the scope the lowest possible to the receiver or barrel, might want to leave enough room between the front lens and the berral for the front lens cap.

[gotsig]

http://www.tikka.fi/scope-mounts-tikka

This may help. If you have a standard barrel and 30 mm scope, low rings may work.

[tony270]

This link might help give you an idea:

http://www.tikkashooters.com/public_html/general-discussion/t3-optics-mounting-options/