Tweet
Hi Guys! Ive decided to change over to the blue team. Im a few hundred bucks short of being able to afford a 1050, so i figured id sell my ammo plant since i doubt ill need it anymore, use the extra cash to buy some spare tool heads and conversion kits. Anyay, heres what i have:
Hornady Lnl Ap $400 - Modern version with EZ eject. Comes with everything it came with: primer pick up tubes, large and small priming system, powder measure system etc..
Shell plates for $30 each: 9, 40/10, 45, 357/38, 223, 7.62x54r,
Case Feeder $300 - The case feeder comes with the linkeage, mount, and all the little things that came with the casefeeder
Feeder plates for $30 each: Large pistol, Small pistol, Small rifle
Bullet feeder $260 - comes with all the things that came with the bullet feeder like the drop tubes etc..
Bullet feeder dies for $20 each: 357/9mm, 40/10, 45
All together thats $1290, but you can buy the whole shebang for $1000. Thats a couple hundred dollars cheaper than buying the ammo plant online, but instead of pickup tubes and lock rings, you get caliber conversion kits. Priority will go to someone that wants everything, otherwise i will sell it peacemeal. Ive made a few adjustments to make it run smoother such as wrapping tape around the primer guide rod, and fitting a plastic tube around the case drop funnel. With these modifications and some time making adjustments, im able to pump out 100 rounds in a little under 3 minutes. If you have someone standing by refilling primer tubes and powder that equates to around 2000 rounds an hour. Although 1000 rounds per hour is more realistic.
Here is a video of me running some 9mm through there at a leisurely rate. I really just made the video to prove that when set up correctly, these things will run reliably without malfuntioning.
ill post some pics later when i get home, FTF is greatly preferred, i can box it up the best i can but i dont have the original boxes anymore, but i do have most of the instructions and literature that came with all this stuff as well as a few other accessories ill throw in if you buy the whole thing.
Hornady Lnl Ap $400 - Modern version with EZ eject. Comes with everything it came with: primer pick up tubes, large and small priming system, powder measure system etc..
Shell plates for $30 each: 9, 40/10, 45, 357/38, 223, 7.62x54r,
Case Feeder $300 - The case feeder comes with the linkeage, mount, and all the little things that came with the casefeeder
Feeder plates for $30 each: Large pistol, Small pistol, Small rifle
Bullet feeder $260 - comes with all the things that came with the bullet feeder like the drop tubes etc..
Bullet feeder dies for $20 each: 357/9mm, 40/10, 45
All together thats $1290, but you can buy the whole shebang for $1000. Thats a couple hundred dollars cheaper than buying the ammo plant online, but instead of pickup tubes and lock rings, you get caliber conversion kits. Priority will go to someone that wants everything, otherwise i will sell it peacemeal. Ive made a few adjustments to make it run smoother such as wrapping tape around the primer guide rod, and fitting a plastic tube around the case drop funnel. With these modifications and some time making adjustments, im able to pump out 100 rounds in a little under 3 minutes. If you have someone standing by refilling primer tubes and powder that equates to around 2000 rounds an hour. Although 1000 rounds per hour is more realistic.
Here is a video of me running some 9mm through there at a leisurely rate. I really just made the video to prove that when set up correctly, these things will run reliably without malfuntioning.
ill post some pics later when i get home, FTF is greatly preferred, i can box it up the best i can but i dont have the original boxes anymore, but i do have most of the instructions and literature that came with all this stuff as well as a few other accessories ill throw in if you buy the whole thing.
Comment