WTB - I need a press

[chris_w]

[Bladewurk]

[chris_w]

Really? I’m mostly doing distance precision shooting these days. I’m hoping to learn the reloading process and do some load development for my two rifles. The cost of match 6.5 Creedmoor isn’t getting any cheaper these days

[plinkr]

What pistol calibers do you shoot? Pistols are easier, and of those the 38 Special is easiest.9 mm, 40 and 45 are next. Rifle cartridges are a bit more challenging and require more equipment because a) they are generally necked, b) often require case resizing and trimming which you don't get with pistol. Best advice is to start by buying and reading a good reloading manual (e.g. Lee). Then reread it a couple of times. You will need the recipes anyway, but can get a solid understanding of what you are doing before starting. A warning: reloading can be fun, and addictive

Sent from my SM-J730F using Tapatalk

[Itscheesey]

Check out this YouTube channel it's full of info.

https://www.youtube.com/user/gavintoobe

Where are you located? There are a few local reloading shops that will help you out with getting started.

Sent from my XT1650 using Tapatalk

[Romanski]

I have a Redding single stage that would work great for you. Also have 6.5mm match bullets, primers, powder and cases. I may have some other things to help you get started. Where are you located? PM me of interested.

P.s I started with precision rifle. In my opinion, reloading rifle, especially on a single stage is more forgiving than reloading pistol, so I would recommend starting with reloading for your creedmoor first.

[chris_w]

Thanks for all the great advice. I live in Santa Clarita (SoCal). I’d definitely be interested in joining any local reloading clubs / groups in the area. The pistol calibers I shoot now are 38, 9mm and 45acp.

[kramynot]

I started with 38 and think it is by far the easiest (I'm assuming you're shooting this in a revolver) and gets you into the hobby. You get the fundamentals down, get the basic equipment, etc. Its also very forgiving since you headspace on a rim and you don't have to worry about cycling a bolt.

Then I'd move to the 6.5 Creedmoor, where you have to start lubing cases (get Imperial Die Wax!), thinking about full length vs. neck sizing, neck turning, etc, depending on how precise you want to be.

After that I'd move to the auto-loaders, your 9mm and 45. Depending on what bullets you are using (HP's, SWC's, etc) and what you are firing them through (tight chambers, feed ramps, etc.), they can be tricky to get feeding reliably.

Also I echo what has been said above, reloading is addictive! You will shoot more and when you're not at the range, reloading helps you stay engaged in the sport.

[JackEllis]

I started with rifle cartridges because I don't own pistols. Someone gave me a single-stage press and I've been adding other things along the way, most recently better tools for trimming cartridges.
Reloading isn't terribly difficult. The fellow who gave me his press started at age 12. You can't be in a hurry and you have to be methodical.