Tweet
Malkoff Device with M60
This is the Black Type version, brand new comes with two new spare surefire batteries.
$70.00 Shipped
Malkoff MD2 (Black Type III HA)
Malkoff Device is manufacturing our own line of flashlights. These flashlights are manufactured in the USA.
This is the Malkoff MD2 Flashlight. It is made of 6061 T6 Structural Aircraft Grade Aluminium. The switch is a Judco forward clickie. The body is O-Ringed and Gasketed for weather-tightness. Type III Anodizing is utilized on exterior. The interior is Chemfilmed for corrosion protection. It is sized for two CR123 or one 18650 cell(s).
The head does not include a lens. As no light blocking lens is needed. It was specially designed for M60 Dropins. The optic will serve as the lens. The M60 is held securely in the head (against the sealing gasket) with a threaded retaining ring. A 1 inch lens can be added by the end user if desired.
Each body is laser engraved with the Model Number, Serial Number, and Made in USA logo.
M60 Mod to fit Surefire
This is the Malkoff Devices P60 style dropin with solid brass heatsink construction. This design utilizes a Cree 8 degree optic. The optic has a very nice balance between throw and spill. It is an outstanding room lighter and short to medium spotter. It was designed specifically for use in SureFire 6P, 6Z, C2, M2 and G2 flashlights. It may or may not fit other models. The input voltage is 3.8 - 9 volts. Below 3.8 volts it will drop out of regulation and run direct drive. The output is 235+ lumens. The current draw is only 750ma at 6 volts. The runtime is 1 1/2+ hours on 2 CR123 primary batteries. It will easily illuminate objects at 350+ feet and will blind opponents within a 100 foot radius. The LED is a Cree XRE 7090.
$70.00 Shipped
Malkoff MD2 (Black Type III HA)
Malkoff Device is manufacturing our own line of flashlights. These flashlights are manufactured in the USA.
This is the Malkoff MD2 Flashlight. It is made of 6061 T6 Structural Aircraft Grade Aluminium. The switch is a Judco forward clickie. The body is O-Ringed and Gasketed for weather-tightness. Type III Anodizing is utilized on exterior. The interior is Chemfilmed for corrosion protection. It is sized for two CR123 or one 18650 cell(s).
The head does not include a lens. As no light blocking lens is needed. It was specially designed for M60 Dropins. The optic will serve as the lens. The M60 is held securely in the head (against the sealing gasket) with a threaded retaining ring. A 1 inch lens can be added by the end user if desired.
Each body is laser engraved with the Model Number, Serial Number, and Made in USA logo.
M60 Mod to fit Surefire
This is the Malkoff Devices P60 style dropin with solid brass heatsink construction. This design utilizes a Cree 8 degree optic. The optic has a very nice balance between throw and spill. It is an outstanding room lighter and short to medium spotter. It was designed specifically for use in SureFire 6P, 6Z, C2, M2 and G2 flashlights. It may or may not fit other models. The input voltage is 3.8 - 9 volts. Below 3.8 volts it will drop out of regulation and run direct drive. The output is 235+ lumens. The current draw is only 750ma at 6 volts. The runtime is 1 1/2+ hours on 2 CR123 primary batteries. It will easily illuminate objects at 350+ feet and will blind opponents within a 100 foot radius. The LED is a Cree XRE 7090.
Comment