Tweet
ITEM IS SOLD
Hey All,
NOTE: If you like to keep your guns nice and pretty and worry if they scuff or scratch this gun is not for you and I probably wouldn't want to sell it to you anyways.
I have here an Addax ATAC GPU. This is the PWS-styled longstroke gas piston system that Addax made before they came out with the ZK series earlier this year. It features a 14.5" CHF chrome lined barrel with a 1:7 twist rate. It has an Addax quad rail made for their piston system. I didn't like the PWS FSC556 because it was too noisy so I switched to to a Smith Vortex flash hider. The garage gunsmith that pinned on the attachment admitted he wasn't much of a welder and he wasn't lying. It doesn't look nice and clean like they do when they come from the factory pinned and welded but it works just fine.
I duracoated the outside of the rifle Magpul FDE but the color is actually a tad lighter than magpul's FDE polymer. Like I said before, I don't baby my guns so there are some scuffs and knicks in the paint from common use.
In the pictures you can see a Geissele SSA trigger. It is NOT INCLUDED with the rifle. The rifle will have its original milspec LPK installed. I am saving the trigger for another build.
So here is what it comes with:
-Addax GPU 14.5" w/ chrome-lined 1:7 barrel
-Addax chrome BCG
-BCM Gunfighter Charging Handle Mod 4
-Troy HK style flip-up front sight
-Troy Di-Optic flip-up rear sight
-POF USA gen II lower receiver
-DPMS LPK
-Bullet Button
-Magpul BAD Lever
-LMT ambi-safety with right side ground down to "short" length
-Magpul ASAP single point attachment end plate
-LMT dry film lubricant 6-pos receiver extension
-Carbine buffer and carbine action spring
-Magpul ACS stock w/ 3 dummy .223 rounds
-Magpul MIAD grip with all three grip sizes
-Magpul Enhanced Aluminum trigger guard
The round count is right at 1300. The gun was just a little over 2K brand new, but I understand that it has depreciated. I am asking $1100 with the buyer paying all PPT fees, but I am willing to hear out reasonable offers. Also, if you are interested in just the upper, I can separate it for $700. I am in between SLO and the Fresno area often and shoot me a PM if you want to try to work something out.
Viable trades:
-Aimpoint T1
-Larue LT660 (Aimpoint micro lower 1/3 mount)
-Larue LT104 Scope mount, for 30mm scopes
-Trijicon TR24 with triangle, green or red
-Trijicon ACOG TA31H (Horseshoe), green or red, preferably red
Thanks for looking, Jon.
Hey All,
NOTE: If you like to keep your guns nice and pretty and worry if they scuff or scratch this gun is not for you and I probably wouldn't want to sell it to you anyways.
I have here an Addax ATAC GPU. This is the PWS-styled longstroke gas piston system that Addax made before they came out with the ZK series earlier this year. It features a 14.5" CHF chrome lined barrel with a 1:7 twist rate. It has an Addax quad rail made for their piston system. I didn't like the PWS FSC556 because it was too noisy so I switched to to a Smith Vortex flash hider. The garage gunsmith that pinned on the attachment admitted he wasn't much of a welder and he wasn't lying. It doesn't look nice and clean like they do when they come from the factory pinned and welded but it works just fine.
I duracoated the outside of the rifle Magpul FDE but the color is actually a tad lighter than magpul's FDE polymer. Like I said before, I don't baby my guns so there are some scuffs and knicks in the paint from common use.
In the pictures you can see a Geissele SSA trigger. It is NOT INCLUDED with the rifle. The rifle will have its original milspec LPK installed. I am saving the trigger for another build.
So here is what it comes with:
-Addax GPU 14.5" w/ chrome-lined 1:7 barrel
-Addax chrome BCG
-BCM Gunfighter Charging Handle Mod 4
-Troy HK style flip-up front sight
-Troy Di-Optic flip-up rear sight
-POF USA gen II lower receiver
-DPMS LPK
-Bullet Button
-Magpul BAD Lever
-LMT ambi-safety with right side ground down to "short" length
-Magpul ASAP single point attachment end plate
-LMT dry film lubricant 6-pos receiver extension
-Carbine buffer and carbine action spring
-Magpul ACS stock w/ 3 dummy .223 rounds
-Magpul MIAD grip with all three grip sizes
-Magpul Enhanced Aluminum trigger guard
The round count is right at 1300. The gun was just a little over 2K brand new, but I understand that it has depreciated. I am asking $1100 with the buyer paying all PPT fees, but I am willing to hear out reasonable offers. Also, if you are interested in just the upper, I can separate it for $700. I am in between SLO and the Fresno area often and shoot me a PM if you want to try to work something out.
Viable trades:
-Aimpoint T1
-Larue LT660 (Aimpoint micro lower 1/3 mount)
-Larue LT104 Scope mount, for 30mm scopes
-Trijicon TR24 with triangle, green or red
-Trijicon ACOG TA31H (Horseshoe), green or red, preferably red
Thanks for looking, Jon.
Comment