Tweet
One AR kit sold. One AR still available.
Make: Benelli
Model: Nova
Caliber: 12 Gauge
Location (city or county): Eastern Sacramento area (Roseville, Rocklin, Folsom, Lincoln, Auburn, Granite Bay, Citrus Heights...) Also travel to the East Bay area often.
Price:$500 $450
Will ship (Y/N): Maybe, but I'd rather not
Other info: Benelli Nova with 18" barrel.
-Trijicon ghost ring night sights
-Two Nordic components magazine extension tubes +2 and +5
-Nordic components low drag magazine follower
-Nordic components barrel/magazine clamp with 2 pic rail sections.
-Noveske push button swivel sling attachment.
-Two Ares defense velcro extra round holders
-Minor feeding port opening for faster smoother reloads
Assembled this shotgun for Heavy Metal class. For those not familiar it's a three gun class that shoots: Single stack .45 caliber pistol, .308 rifle, pump action 12G shotgun. That's why I have the super long tube, because per the rules I could start a stage with 10 rounds in the mag. It made sense for the games, but looks kinda funny. Around the house I'd keep the +2 mag tube extension on that sits flush with the end of the barrel.
I kept all the internals and trigger bone stock for reliability. There is a little wear on the top of the barrel from the magazine tube clamp, and a little scuff on the rear ghost-ring sight. Overall very good condition though. Can you buy a new one for this price? Sure, but this one is setup VERY nicely!
Make: Palmetto State Armory
Model: AR-15 Mid-Length Freedom Kit with Magpul Furniture
Caliber: 5.56
Location (city or county): Eastern Sacramento area (Roseville, Rocklin, Folsom, Lincoln, Auburn, Granite Bay, Citrus Heights...) Also travel to the East Bay area often.
Price: $500 - $600 depending on configuration
Will ship (Y/N): Maybe, but I'd rather not
Other info:I have two of these and they are unopened in the sealed box from Palmetto State Armory. Obviously unfired. The upper is fully assembled at the factory by professionals but the lower parts kit will need to be installed. The "freedom" kits are spec'd with much nicer parts than their standard kits but a step below their "premium" kits. Here is a link to the product description. This is an upgrade from their standard freedom kit as it has Magpul grip, stock, and furniture. I'll take a picture, but it'll just be a sealed cardboard box. Serious buyers will be allowed to open the box to inspect the contents.
I'll offer this in a couple configurations:
1) $500 - I could sell the kit without a lower for $500. No DROS necessary.
2) $550 - I could sell the kit with a stripped Anderson Lower. You take the kit home today, and we'll only DROS the lower. Then you assemble the rifle yourself after the gun shop releases the lower to you.
3) $600 - I could assemble for you in a featureless configuration and we would DROS the whole rifle. This is more expensive because I would have to supply a featureless grip, fix the stock, and add a muzzle thread protector.
Add an optic: For another $300 I'll include a Vortex 1-6 Strike Eagle LPVO in a Aero Precision ultralight mount. Has Vortex brand flip up scope caps and fresh battery. (If someone wants to buy this scope separately I'll do that too)
I'll get some pictures up tomorrow, or PM me your number for photos. Buyer pays DROS fees.
Would be interested in a trade, or partial trade, for:
-a Dillon 550 reloading press
-a Redding T-7 turret press
-Glock 19/23 .22lr conversion kit
-Savage small shank 6.5 Creedmoor barrel
-Savage short action Oryx chassis
-Spotting scope with MIL based reticle
-Kestrel with Applied Ballistics
Make: Benelli
Model: Nova
Caliber: 12 Gauge
Location (city or county): Eastern Sacramento area (Roseville, Rocklin, Folsom, Lincoln, Auburn, Granite Bay, Citrus Heights...) Also travel to the East Bay area often.
Price:
Will ship (Y/N): Maybe, but I'd rather not
Other info: Benelli Nova with 18" barrel.
-Trijicon ghost ring night sights
-Two Nordic components magazine extension tubes +2 and +5
-Nordic components low drag magazine follower
-Nordic components barrel/magazine clamp with 2 pic rail sections.
-Noveske push button swivel sling attachment.
-Two Ares defense velcro extra round holders
-Minor feeding port opening for faster smoother reloads
Assembled this shotgun for Heavy Metal class. For those not familiar it's a three gun class that shoots: Single stack .45 caliber pistol, .308 rifle, pump action 12G shotgun. That's why I have the super long tube, because per the rules I could start a stage with 10 rounds in the mag. It made sense for the games, but looks kinda funny. Around the house I'd keep the +2 mag tube extension on that sits flush with the end of the barrel.
I kept all the internals and trigger bone stock for reliability. There is a little wear on the top of the barrel from the magazine tube clamp, and a little scuff on the rear ghost-ring sight. Overall very good condition though. Can you buy a new one for this price? Sure, but this one is setup VERY nicely!
Make: Palmetto State Armory
Model: AR-15 Mid-Length Freedom Kit with Magpul Furniture
Caliber: 5.56
Location (city or county): Eastern Sacramento area (Roseville, Rocklin, Folsom, Lincoln, Auburn, Granite Bay, Citrus Heights...) Also travel to the East Bay area often.
Price: $500 - $600 depending on configuration
Will ship (Y/N): Maybe, but I'd rather not
Other info:
I'll offer this in a couple configurations:
1) $500 - I could sell the kit without a lower for $500. No DROS necessary.
2) $550 - I could sell the kit with a stripped Anderson Lower. You take the kit home today, and we'll only DROS the lower. Then you assemble the rifle yourself after the gun shop releases the lower to you.
3) $600 - I could assemble for you in a featureless configuration and we would DROS the whole rifle. This is more expensive because I would have to supply a featureless grip, fix the stock, and add a muzzle thread protector.
Add an optic: For another $300 I'll include a Vortex 1-6 Strike Eagle LPVO in a Aero Precision ultralight mount. Has Vortex brand flip up scope caps and fresh battery. (If someone wants to buy this scope separately I'll do that too)
I'll get some pictures up tomorrow, or PM me your number for photos. Buyer pays DROS fees.
Would be interested in a trade, or partial trade, for:
-a Dillon 550 reloading press
-a Redding T-7 turret press
-Glock 19/23 .22lr conversion kit
-Savage short action Oryx chassis
-Spotting scope with MIL based reticle
-Kestrel with Applied Ballistics
Comment