Tweet
Make: Nighthawk Custom
Model: T3, converted to 9mm by Springfield Armory Custom Shop
Location: Bay Area
Price: $3000
Will ship (Y/N): No
This started out as a Nighthawk Custom T3 in .45. It was converted over to a 9mm by Springfield Armory Custom Shop. I put approximately 150 rounds through it as a .45, and 300 rounds as a 9mm. It has had the entire slide and barrel replaced. I'm selling this to help fund graduate school. This gun in total cost approximately $4500. Here is the list of modifications done by SACS:
-HARRISON BOMAR CUT -FIXED N/S
-NOVAK FRONT NIGHT SIGHT
-SA CUSTOM NM 9MM 4.25" RAMP BARREL
-EGW Carry Bevel BUSHING
-1911-A1 OVERSIZED BARREL LINK
-1911-A1 BARREL LINK PIN (CUSTOM)
-SERRRATE REAR OF SLIDE 50LPI/MATCHING SIGHT.
-BALL CUTS ON SLIDE
-HARD CHROME SLIDE & SM PARTS
-9MM COMMANDER LENGTH SLIDE
-9MM AFTEC EXTRACTOR
-FIT AND BLEND SUPPLIED THUMB SAFETY
-INSTALL & FIT EGW SQUARE BOTTOM FPSTOP
-ED BROWN 9MM FIRING PIN
-WOLFF EXTRA POWER FIRING PIN SPRING
-EGW LONG NOSE SPRING PLUG
Also has:
-Custom contoured Harrison Custom short trigger
-Custom mid-ride thumb safety made by EGW
-x6 Metalform 9mm 8 round magazines. NOTE: These mags have trouble feeding if loaded all the way to 8 rounds. I find that downloading by one makes them feed just fine.
*Corner of rear sight is not marred, it's sunlight.
Note: I will include the original slide and barrel. However, I was informed by SACS that it is not interchangeable back to .45 ACP. Gun has sat in my closet for a long time.
Model: T3, converted to 9mm by Springfield Armory Custom Shop
Location: Bay Area
Price: $3000
Will ship (Y/N): No
This started out as a Nighthawk Custom T3 in .45. It was converted over to a 9mm by Springfield Armory Custom Shop. I put approximately 150 rounds through it as a .45, and 300 rounds as a 9mm. It has had the entire slide and barrel replaced. I'm selling this to help fund graduate school. This gun in total cost approximately $4500. Here is the list of modifications done by SACS:
-HARRISON BOMAR CUT -FIXED N/S
-NOVAK FRONT NIGHT SIGHT
-SA CUSTOM NM 9MM 4.25" RAMP BARREL
-EGW Carry Bevel BUSHING
-1911-A1 OVERSIZED BARREL LINK
-1911-A1 BARREL LINK PIN (CUSTOM)
-SERRRATE REAR OF SLIDE 50LPI/MATCHING SIGHT.
-BALL CUTS ON SLIDE
-HARD CHROME SLIDE & SM PARTS
-9MM COMMANDER LENGTH SLIDE
-9MM AFTEC EXTRACTOR
-FIT AND BLEND SUPPLIED THUMB SAFETY
-INSTALL & FIT EGW SQUARE BOTTOM FPSTOP
-ED BROWN 9MM FIRING PIN
-WOLFF EXTRA POWER FIRING PIN SPRING
-EGW LONG NOSE SPRING PLUG
Also has:
-Custom contoured Harrison Custom short trigger
-Custom mid-ride thumb safety made by EGW
-x6 Metalform 9mm 8 round magazines. NOTE: These mags have trouble feeding if loaded all the way to 8 rounds. I find that downloading by one makes them feed just fine.
*Corner of rear sight is not marred, it's sunlight.
Note: I will include the original slide and barrel. However, I was informed by SACS that it is not interchangeable back to .45 ACP. Gun has sat in my closet for a long time.
Comment