Tweet
Make: Ruger
Model: LCP
Caliber: 380
Price: $600
Round count: ~400
Comes with: 2 original Ruger mags (1 flush 1 pinky extension), 1 aftermarket mag with pinky extension - all 6 round, extra parts (original and new), Hogue slip on grip, kydex holster.
PPT in ventura county, buyer pays DROS, Prefer Camarillo Gun store, 2nd oxnard turners, 3rd grettas simi.
Up for sale is an in my name off roster "Gen 1" LCP 380. This is a "dash" serial number "gen 1" with the low non snag sights, model 03701 shipped in 2010 according to ruger. I am the 3rd owner, previous two owners used this as a CCW so it does have some signs of ccw wear but they didnt shoot it much. I got it and completely went through the firearm. Out of my OCD to make sure things were 100% proper, I replaced with factory Ruger parts the following; Hammer spring, hammer (with the newer part number redesign), pivot pins, FCG pins with gen2 metal pins, pretty much every spring, mag catch (which I shaved a little to prevent accidental mag drops), Firing pin, firing pin spring, extractor and all of its necessary items. I did go with a Wolf 11# main slide spring vs the OEM Ruger from my research among other things. I have polished the feed ramp of the barrel. All original parts that were swapped with new OEM parts will come with it.
Like stated when I got it, it worked well but I went through it and decided to make sure I could trust it 100% so ended up replacing most moving parts with OEM or better. Built it up and realized, I'm not a great pistol shooter, im OK at best with a full size 9mm... a pocket pistol.... not so much. So after putting a couple boxes through it I really haven't shot it much and its sat the last few years.
Any questions feel free to ask here or via PM.
Model: LCP
Caliber: 380
Price: $600
Round count: ~400
Comes with: 2 original Ruger mags (1 flush 1 pinky extension), 1 aftermarket mag with pinky extension - all 6 round, extra parts (original and new), Hogue slip on grip, kydex holster.
PPT in ventura county, buyer pays DROS, Prefer Camarillo Gun store, 2nd oxnard turners, 3rd grettas simi.
Up for sale is an in my name off roster "Gen 1" LCP 380. This is a "dash" serial number "gen 1" with the low non snag sights, model 03701 shipped in 2010 according to ruger. I am the 3rd owner, previous two owners used this as a CCW so it does have some signs of ccw wear but they didnt shoot it much. I got it and completely went through the firearm. Out of my OCD to make sure things were 100% proper, I replaced with factory Ruger parts the following; Hammer spring, hammer (with the newer part number redesign), pivot pins, FCG pins with gen2 metal pins, pretty much every spring, mag catch (which I shaved a little to prevent accidental mag drops), Firing pin, firing pin spring, extractor and all of its necessary items. I did go with a Wolf 11# main slide spring vs the OEM Ruger from my research among other things. I have polished the feed ramp of the barrel. All original parts that were swapped with new OEM parts will come with it.
Like stated when I got it, it worked well but I went through it and decided to make sure I could trust it 100% so ended up replacing most moving parts with OEM or better. Built it up and realized, I'm not a great pistol shooter, im OK at best with a full size 9mm... a pocket pistol.... not so much. So after putting a couple boxes through it I really haven't shot it much and its sat the last few years.
Any questions feel free to ask here or via PM.
Comment