Gone

[Tim padilla]

Been hunting one of these up for close to 10 years and finally found one recently . Super stoked to get it but my collecting interests have changed this year so this is available. Very scarce firearm in today?s times to acquire.Last one I saw sell on LSB Auctions I couldn?t afford at the time as it sold for $2,025 mint condition no box without a factory mag. Here?s alittle info on this finely made pistol .

Made for FNH by P.Beretta and distribution by Browning Arms

Date code on gun puts it made in 1982 , build for that year serial number is under 2,500.

Very high quality finishing on these compared to other Beretta 84 series..Beautiful rich blued slides and glossy anodized frames .Smooth finished walnut grips with Browning emblems .

No box or docs just the pistol and 1 factory OEM 10/13 magazine. (Mags are the same as Beretta 84 series and are readily available from MecGar for around 25-30 bucks. )

Overall gun in very good condition with some marks on the walnut grips and few spots at the leading edge of the dust cover .Black anodizing can be touched up rather easy but I will leave that to the new owner ,I?d rather sell it in total honest condition. It?s a easy 95%+ condition gun.The frame to slide fit is buttery smooth and overall finish is what you?d expect on Belgium Hi Power. The factory single action trigger breaks very crisp . There is zero holster wear. Will send pictures of firearm to interested parties PM me your cell .

Willing to trade for a Colt SAA in good used condition or better. Any gen .Any caliber.

Located in Ventura County willing to travel out to LA and Santa Barbara counties

Cash price $1,100 1/17 price drop $950 1/18 $875 Final giving it away price dump(sold)

Buyer flaked big time hours before our meet up . Still for sale as of 11:45 am Sunday.

Too many interested in pics and I already asked the second inline with no response.This is a deal .First to text me at Eight zero 5 -3zero two-18six1can get pics right away and can meet soon (today if possible I?m near Aeon Tac Inc by Rowland Hills now) gets the pistol.
.................................................. .................................................. ..............



Smith & Wesson model 66 no-dash 357 mag snub nose Stainless
Early 66 Pinned barrel recessed cylinder
Factory wood magna grips
Red ramp black rear adjustable sights minty piece factory brushed finish ex condition
Slight cylinder line
99% condition
No box or docs just the revolver
One of the top 66 snubbies out of my collection
$1,200 SOLD















..

[Tim padilla]

FS WW2 Walter PP 32 cal 1944 $800 Ventura County

Listed pistol in Collectors Exchange as well
Walter PP 32 cal
Serial number puts it at 1944 made
No import marks so it must have been a GI ?duffle bag pistol?
period correct mag with Walter banner and PP stamp on the lower left side of the magazine
Fourth change later war finish semi bright bluing
Rare reddish/brown grip panels that were used for a short period in between the black panels and then wood due to the lack of petroleum based products during the German war effort.They are in excellent condition with no chips warping or cracks. A pair of grips like this alone are $300+ if you can find them.
Waffen 359 military acceptance proofed not just a common commercial pistol with eagle over N stamps on the slide, frame & barrel
This gun is a survivor it?s 80 years old.
The one knock this pistol has is there?s pitting on the banner side of the slide and a area near the bottom of the trigger guard plus some scattered small marks .Is it from blood staining or was it left in its holster during wartime in wet conditions,I don?t know you be the judge.I repeat this gun has pitting it?s a battlefield used pistol not a mint condition PP for a few grand. Perfect gun to get started in WW2 collecting or to fill a slot that?s open in a growing collection.
I had a gunsmith look it over and he gave it a bill of health to be a shooter
Considering the condition he figured it at 65-70% condition with the pitting it would be much higher without since the factory bluing is still there on the majority of the gun . The old military adage that the higher the rank the smaller the gun and the Nazi party was no different. WW2 pistols are ever climbing in value and a military Walter PP or PPK are slowly getting out of reach for most blue collars unless you have deep pockets buying higher grade pieces..
A war time PP such as this in 90%+ condition is well over $2,300+
I?m in Ventura County but willing to drive as far as the OC to Aeon Tac Inc or up in Santa Barbara County in the Goleta area. any place in LA County.
My reason for selling is I?m trying to raise some funds to help out a situation with a friend of mine that past under the knife then his wife died of cancer months later and left there young son to be raised by her aging Grandmother. The go fund me moneys are dried up and she?s having financial issues.I?ve sold other items over this last year to help since I have more stuff than coinage.
Thank you for the interest
Please leave your cell number in a PM and I?ll get pics out as soon as possible.
Asking $975 reduced 1/30 $800

[Tim padilla]

S&W Prelock snubbies for sale SoCal

wheel guns out of my Smith collection for sale. No trades at this time.located in Ventura County willing to meet for a sale in Santa Barbara,LA & top end of OC . No boxes or docs for any of these but they are all in really good shape. look any of them over through the pics I can send in a text to your cell# I don?t like messing with Email. My home gun shops are Camarillo Gun Store and Greta?s in Simi.Willing to meet at any other mom and pop store in the counties mentioned.zero Turners please.


S&W 12-2 38 special airweight snub/round butt Nickel pin barrel no fogging in finish couple small handling marks finish is very bright still .Pachmayr grip no finger grooves scarce gun .I haven?t ran across one of these in decades.$885

S&W 649-3 357 mag J frame stainless prelock shrouded hammer ex condition .Last version before it was ruined by the Hilary hole.original uncle mikes OEM rubber grips . Perfect concealable jack hammer $1,000





*Please PM if there?s any questions it?s much easier than posting them here.

[Tim padilla]

Gone

Looking to sell these revolvers
All S&W prelocks

1) S&w 696 No Dash prelock Stainless 44 special L frame 3? barrel full length guide rod . Scarce gun one of the last revolvers made by S&W that had forged hammer and trigger /case hardened and hammer mounted firing pin.
Minty condition /minor handling
No box or docs
Oem uncle mikes grip
S&W badged factory Hogue rubber round butt to square conversion grip included
Quality black leather pancake style holster (right side)
$1,500 (SOLD)

2) S&W 15-3 blued prelock scarce 2? snub nose barrel 38 special
Factory matching box ,papers and tool kit included
Ex condition min use. Previous owner greased it well before long term storage and it?s gummy . Needs a good cleaning is the only negative of this piece. I refuse to mess with a detail cleaning myself .I?d leave it to a Smith .full inspection before purchase can be arranged. It?s a super nice gun .
Factory magnas included
$1,150(SOLD)

3) S&W 12-2 airweight 2? round butt nickel
Finish is in very good condition.some small areas of flaking finish loss under the grips Bright nickel finish is intact on rest of revolver .No fogging in nickel
No oem grips /no box Pachmayr rubber boot grip installed.
Scare revolver rarely run across them in this good shape , With most airweight k frames I have came across if they are not safe queens then they have been carried heavily.Your often seeing much anodizing or nickel loss on the aluminum light weight frames .This one is in good shape especially from being made in 1968.
$850(SPF)

Located in Ventura County and that?s where I?d prefer to do a PPT . Camarillo Gun Store unless you purchase two then we can discuss different options out of my county (OC ,SB,LA ,etc..)

Always willing to accept trade offers for custom knives ONLY from boys like,

Randall made Knives

Joe kious

Bill Bagwell

Jimmy Lile

Rudy Ruana

Winkler

Real WW1/WW2 trench knives

Push daggers from

Gil Hibben

Jim Ferguson

Pocket knives from

Protech

Microtech

Benchmade

Possibly a used end mill set up with a jig for metal tube notching

PM me with questions thanks