Tweet
SOLD to Break1995 AND NO LONGER AVAILABLE
Location: Pasadena, CA (Los Angeles County)
Make: Springfield Custom
Model: PC9119LR
Caliber: 9mm
Barrel: Custom 5" Forged Stainless Steel, Match Grade, Fully Supported Ramp, 1:16
Will ship: No (Off-Roster)
Condition: Pre-Owned, Fully-Operational. There is visible finish/parts wear (see images for additional details).
Asking Price: $3600 US Dollars
Note: I make absolutely no profit off this asking price - it's actually a bit less than what everything cost me. As far as I am aware, this is the only PC9119LR currently available for sale on CalGuns - if there is another CG PC9119LR sales thread that I am not aware of, and they are asking for less, please let me know, and I will at that point be open to counter-offers.
Buyer pays PPT/DROS fees, and will be responsible for purchasing a DOJ approved lock (if deemed necessary by the FFL) - *bring cash*.
Trades: No trades at this time please.
INTRODUCTION
-----------------
Hello my friends, the item for sale is a Springfield Custom PC9119LR 9mm pistol.
It's been a few months since I have been to a gun shop, and I'm not entirely sure what the current PPT situation is like at various FFLs. That said, I heard my favorite FFL (Alamo in West Covina) is still accepting PPTs on specific days of the week, and does not have crazy lines. I would prefer to meet there, unless I am offered a more appealing location to conduct the PPT at.
WHAT THE SALE ACTUALLY INCLUDES
--------------------------------------------
The buyer will receive the following:
•Springfield Custom PC9119LR 9mm Pistol
•Original Springfield Custom Hard Case
•3x 10-Round Chip McCormick 9mm 1911 Magazines
•5x 10-Round Wilson Combat Vickers Duty 9mm 1911 Magazines (ITEM # 800-9) (4 of them are NIB)
•1x 10-Round Wilson Combat Elite Tactical 9m 1911 Magazine (ITEM # 500-9)
•Springfield Custom Certificate of Authenticity
•Operation and Safety Manual
The pistol did not come with the stock cocobolo wood grips when I bought it. The buyer will receive ONE of the following pairs of flat-bottom grips of their choice:
•10-8 Performance G10, 5LPI, Grey/Black (Marked VZ), with Super Scoop
•VZ G10, 320, Black Cherry, No Thumb Scoop, with Palmswell
•VZ G10, Slants, Hyena Brown, Thumb Scoop
CONDITION SPECIFICS
------------------------
I am not the original purchaser/owner of this pistol. The round count through this pistol before being transferred to me is unknown.
I have fired exactly 110 rounds of 115 grain standard-pressure 9x19mm ammunition through this pistol. I have never experienced any stoppages, malfunctions, nor parts breakages with this pistol.
There is slight visible finish wear on the side of the slide near the muzzle, as well as on both safety levers. There is also a faint scratch on the right side of the slide forward of the ejection port. And of course, the usual finish wear to the hammer face, frame rails, barrel hood, etc.
I secured the trigger overtravel screw with Loctite 222MS, and adjusted the trigger in quarter turns until the hammer could swing freely (with zero perceptible drag from the half cock notch) with the trigger depressed and the mainspring housing assembly removed.
MORE INFO BOILERPLATE
-----------------------
•No shipping at this time. Cash only please (no checks, money orders, USPS money orders, IOUs, etc.).
•The first "I'll take it" (implying acceptance of my asking price) in this thread gets priority over any counter-offers or "I'm interested" statements.
•If multiple offer acceptances are made, item will be offered to next buyer in line if prior buyer fails to complete sale or maintain contact within a time frame I deem to be reasonable.
•If, in the event that the first buyer is unable to complete the transaction, the item will be offered to other Calgunners based *solely* on the order in which they post a "I'll take it" after the first buyer did. This keeps things fair for everyone, and you can always delete such a post if you change your mind before I get to you.
•The buyer will be given the opportunity to perform an inspection of the firearm when we meet at the FFL shop, prior to payment.
•All sales are final. I offer no warranty, express or implied.
•Buyer is responsible for all PPT/DROS fees at the dealer.
•Upon successful and smooth completion of transaction, I will leave positive iTrader feedback for the buyer.
•I reserve the right to decline sales to anyone for any reason.
•Please feel free to PM me with any questions you may have.
ITEM IMAGES
------------------
(Please click on the thumbnails for the full size images)
Location: Pasadena, CA (Los Angeles County)
Make: Springfield Custom
Model: PC9119LR
Caliber: 9mm
Barrel: Custom 5" Forged Stainless Steel, Match Grade, Fully Supported Ramp, 1:16
Will ship: No (Off-Roster)
Condition: Pre-Owned, Fully-Operational. There is visible finish/parts wear (see images for additional details).
Asking Price: $3600 US Dollars
Note: I make absolutely no profit off this asking price - it's actually a bit less than what everything cost me. As far as I am aware, this is the only PC9119LR currently available for sale on CalGuns - if there is another CG PC9119LR sales thread that I am not aware of, and they are asking for less, please let me know, and I will at that point be open to counter-offers.
Buyer pays PPT/DROS fees, and will be responsible for purchasing a DOJ approved lock (if deemed necessary by the FFL) - *bring cash*.
Trades: No trades at this time please.
INTRODUCTION
-----------------
Hello my friends, the item for sale is a Springfield Custom PC9119LR 9mm pistol.
It's been a few months since I have been to a gun shop, and I'm not entirely sure what the current PPT situation is like at various FFLs. That said, I heard my favorite FFL (Alamo in West Covina) is still accepting PPTs on specific days of the week, and does not have crazy lines. I would prefer to meet there, unless I am offered a more appealing location to conduct the PPT at.
WHAT THE SALE ACTUALLY INCLUDES
--------------------------------------------
The buyer will receive the following:
•Springfield Custom PC9119LR 9mm Pistol
•Original Springfield Custom Hard Case
•3x 10-Round Chip McCormick 9mm 1911 Magazines
•5x 10-Round Wilson Combat Vickers Duty 9mm 1911 Magazines (ITEM # 800-9) (4 of them are NIB)
•1x 10-Round Wilson Combat Elite Tactical 9m 1911 Magazine (ITEM # 500-9)
•Springfield Custom Certificate of Authenticity
•Operation and Safety Manual
The pistol did not come with the stock cocobolo wood grips when I bought it. The buyer will receive ONE of the following pairs of flat-bottom grips of their choice:
•10-8 Performance G10, 5LPI, Grey/Black (Marked VZ), with Super Scoop
•VZ G10, 320, Black Cherry, No Thumb Scoop, with Palmswell
•VZ G10, Slants, Hyena Brown, Thumb Scoop
CONDITION SPECIFICS
------------------------
I am not the original purchaser/owner of this pistol. The round count through this pistol before being transferred to me is unknown.
I have fired exactly 110 rounds of 115 grain standard-pressure 9x19mm ammunition through this pistol. I have never experienced any stoppages, malfunctions, nor parts breakages with this pistol.
There is slight visible finish wear on the side of the slide near the muzzle, as well as on both safety levers. There is also a faint scratch on the right side of the slide forward of the ejection port. And of course, the usual finish wear to the hammer face, frame rails, barrel hood, etc.
I secured the trigger overtravel screw with Loctite 222MS, and adjusted the trigger in quarter turns until the hammer could swing freely (with zero perceptible drag from the half cock notch) with the trigger depressed and the mainspring housing assembly removed.
MORE INFO BOILERPLATE
-----------------------
•No shipping at this time. Cash only please (no checks, money orders, USPS money orders, IOUs, etc.).
•The first "I'll take it" (implying acceptance of my asking price) in this thread gets priority over any counter-offers or "I'm interested" statements.
•If multiple offer acceptances are made, item will be offered to next buyer in line if prior buyer fails to complete sale or maintain contact within a time frame I deem to be reasonable.
•If, in the event that the first buyer is unable to complete the transaction, the item will be offered to other Calgunners based *solely* on the order in which they post a "I'll take it" after the first buyer did. This keeps things fair for everyone, and you can always delete such a post if you change your mind before I get to you.
•The buyer will be given the opportunity to perform an inspection of the firearm when we meet at the FFL shop, prior to payment.
•All sales are final. I offer no warranty, express or implied.
•Buyer is responsible for all PPT/DROS fees at the dealer.
•Upon successful and smooth completion of transaction, I will leave positive iTrader feedback for the buyer.
•I reserve the right to decline sales to anyone for any reason.
•Please feel free to PM me with any questions you may have.
ITEM IMAGES
------------------
(Please click on the thumbnails for the full size images)
Comment