Unconfigured Ad Widget

Collapse

Blackhawk Coyote Buttstock Magazine Pouch fits AR's, Mini's etc. $7 each 3 for $20

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • MET1
    CGN/CGSSA Contributor - Lifetime
    CGN Contributor - Lifetime
    • Nov 2007
    • 379

    Blackhawk Coyote Buttstock Magazine Pouch fits AR's, Mini's etc. $7 each 3 for $20

    I have several Eagle Industries MOLLE pouches. They are in about new condition. They will hold two, 20 round 5.56mm mags or one smoke. $12 each plus $4 shipping per order regardless of how many you order.









  • #2
    MET1
    CGN/CGSSA Contributor - Lifetime
    CGN Contributor - Lifetime
    • Nov 2007
    • 379

    USMC issue Coyote 8 mag AR pouch $12 each or 2 for $20

    These pouches were originally designed to hold 200 rounds of ammo for the M-249. Being as there are not to many of those floating around in our civilian hands,they work equally well for holding 8 AR mags. They are American made for the Marine Corp and were recently surplused. The pouch you receive will be new and unopened.

    Made of 1000 denier heavy duty nylon
    Reinforced plastic sides
    Attaches to MOLLE equipment
    Grommet for drainage in the bottom of pouch
    Approximately 8" L x 7" H x 3" W

    They have plenty of other uses besides mag pouches. The work well as utility pouches on the exterior of packs,plate carriers, and rifle cases.

    Shipping is $5 for up to 4 pouches. I do not support Paypal, so a check, money order, or cash will work.









    Comment

    • #3
      MET1
      CGN/CGSSA Contributor - Lifetime
      CGN Contributor - Lifetime
      • Nov 2007
      • 379

      .50 cal ammo cans: 3 for $25 in the Inland Empire

      Sold out.

      Comment

      • #4
        MET1
        CGN/CGSSA Contributor - Lifetime
        CGN Contributor - Lifetime
        • Nov 2007
        • 379

        Moved

        Moved

        Comment

        • #5
          MET1
          CGN/CGSSA Contributor - Lifetime
          CGN Contributor - Lifetime
          • Nov 2007
          • 379

          Naval Surface Warfare Center Weapons Rack (Inland Empire) Fourth rack added 5/25/14

          This one is SPF. Rack #2 listed below!



          I'm selling off a surplus Navy weapons cabinet. The cabinet was manufactured for the Navy Surface Warfare Center at Crane, Indiana. Inside the door is a sticker of authenticity.




          The unit is 51 inches wide, by 51 inches high. It is 15 inches deep. It can be used as a stand alone gun locker if you bolt it to the ground and wall and use a high security padlock. It will also make a great secure place to store your ammo. The cabinet can hold 36 .50 cal cans and 4 .30 cal cans for a total of 40 cans. (The ammo cans are not included.)



          The cabinet is very high quality and not some Harbor Freight cabinet that's painted grey. I'm sure Uncle Adam spent a lot of our tax money on it. It's in excellent condition, but has been used. If you are looking for a way to secure your weapons,ammo, or mags, without breaking the bank, take a look.










          The interior is grooved for modular weapon inserts that allows it to be configured to hold most any rifle or crew served weapon. It is currently set up to hold 4 AR's (or similar weapons) and 3 long guns/shotguns. It also has a rack that holds 5 pistols as well. In this configuration you can also fit 12-15 .50 call cans.(Again, ammo cans not included)



          The price for the cabinet as configured is $225.

          I WILL NOT SHIP, and before you ask, I will not drive several hundred miles to drop it off at your house. I'm in the San Bernardino area I will go as far west as Rancho, as far east as Yucaipa, north to Devore and south to Mo Valley. Please contact me if you have any questions or would like a pic of it configured how you would like it.

          Comment

          • #6
            MET1
            CGN/CGSSA Contributor - Lifetime
            CGN Contributor - Lifetime
            • Nov 2007
            • 379

            Rack #2SOLD PENDING FUNDS, I will be posting rack #3 as soon as I can. It is a complete rack set up identically to this one. Same price. PM me if interested.


            This rack is complete. It was originally set up to hold 20 M500's and comes with the serial numbers of the weapons still tapped on the front of the rack. The mounts inside are the same used for the M-4, so it will hold 20 of your similar sized rifles in a compact space. This one is $325.

            Front of cabinet:

            Cabinet Content list:

            Close up list of contents:


            Top Inserts:


            Overall of inserts:


            Door sticker:


            Stock inserts:


            This is a pic of a Rem 1100 and Mossberg 500 in one bay of the rack.
            Last edited by MET1; 05-13-2014, 3:26 PM.

            Comment

            • #7
              MET1
              CGN/CGSSA Contributor - Lifetime
              CGN Contributor - Lifetime
              • Nov 2007
              • 379

              Naval Surface Warfare Center Weapons Rack (Inland Empire)

              SOLD





              I'm selling off a surplus Navy weapons cabinet. The cabinet was manufactured for the Navy Surface Warfare Center at Crane, Indiana. Inside the door is a sticker of authenticity.




              The unit is 51 inches wide, by 41 inches high. It is 15 inches deep. It can be used as a stand alone gun locker if you bolt it to the ground and wall and use a high security padlock. It will also make a great secure place to store your ammo. The cabinet can hold 36 .50 cal cans and 4 .30 cal cans for a total of 40 cans. (The ammo cans are not included.)



              The cabinet is very high quality and not some Harbor Freight cabinet that's painted grey. I'm sure Uncle Adam spent a lot of our tax money on it. It's in excellent condition, but has been used. If you are looking for a way to secure your weapons,ammo, or mags, without breaking the bank, take a look.










              The interior is grooved for modular weapon inserts that allows it to be configured to hold most any rifle or crew served weapon. It is currently set up with 10 rifle inserts on the bottom.


              The price for the cabinet as configured is $275. I am not interested in trades at this time.

              I WILL NOT SHIP, and before you ask, I will not drive several hundred miles to drop it off at your house. I'm in the San Bernardino area I will go as far west as Rancho, as far east as Yucaipa, north to Devore and south to Mo Valley. Please contact me if you have any questions or would like a pic of it configured how you would like it.

              Comment

              • #8
                MET1
                CGN/CGSSA Contributor - Lifetime
                CGN Contributor - Lifetime
                • Nov 2007
                • 379

                Santa Cruz shotgun clamp and stock holder $25 per set

                I have several sets of these. They will fit most pump shotguns and are useful for mounting the weapon for fast access. These ARE NOT locks. They spring closed and secure the weapon under spring tension only. Included is a support for the buttstock. These can be mounted in RV's, homes, and anywhere you may need a weapon quickly and don't want to fumble with a lock.

                The clamps are in used, very functional condition. I prefer to meet FTF at Turners in San Bernardino. $25







                Comment

                • #9
                  MET1
                  CGN/CGSSA Contributor - Lifetime
                  CGN Contributor - Lifetime
                  • Nov 2007
                  • 379

                  SOLD USMC Coyote dump pouch. New in wrap $12 each/ 2 for $20

                  Sold Out

                  These are surplus USGI dump pouches. They are American made and new in the package. $12 each or 2 for $20. Shipping is $5 per order for one or forty. I do not support Paypal, so a check, cash, or M/O is preferred. I can also meet at Turners in San Bernardino for FTF pick up.









                  Made of 1000 Denier nylon cordura
                  Designed to secure nine (9) spent M16/M4 30 round magazines
                  Secured by a drawstring opening and features s reinforced stiffener to maintain the bags shape


                  The opening can be closed using a velcro closure tab


                  The dump pouch can be rolled up and secured by Velcro fastener when not in use
                  Interior is rubberized reinforced nylon with a drainage grommet at the bottom of the pouch


                  12 external elastic attachment points.

                  Comment

                  • #10
                    MET1
                    CGN/CGSSA Contributor - Lifetime
                    CGN Contributor - Lifetime
                    • Nov 2007
                    • 379

                    Zeiss night vision rifle scope with case: $450

                    SOLD

                    I'm selling my surplus night vision scope. It is fully functional and works great. Here is some info on the unit:




                    The Orion 80/I made by Zeiss/Eltro is a high-quality starlight night vision scope currently in use by the German Bundeswehr. This scope features high-tech XX1211 and XX 1340 image intensifier tubes, flash protection capabilities, reticle adjusters, focus knob, on/off button and shade control knob, reticle brightness knob and a rubber protection cover.

                    There are plenty of videos on Youtube on this optic, so you can see what the reticle looks like and what you can expect to see when using the unit. I fully expect you to examine the unit at night to confirm it works as advertised. These units are built like tanks and an excellent value for a night vision weapon sight.

                    Normally these units come with three mounts, one for a G-3, one for a rocket launcher, and one for a machine gun. I sold these mounts and purchased an ARMS adapter so the unit will now mount on standard Picatinny rail. The ARMS rail is included with the unit as well as the original carrying case and tool/spare bolts. The original instruction manual is included as well. The lens cover is held on by two plastic straps. On of these straps is broken. The cover still fits on plenty tight, but I wanted to make sure to include a photo of the broken strap.

                    $450 firm. I can meet at Turners in San Bernardino most evenings. Please PM me any questions or for any addition pics you may want.













                    Comment

                    • #11
                      MET1
                      CGN/CGSSA Contributor - Lifetime
                      CGN Contributor - Lifetime
                      • Nov 2007
                      • 379

                      Sold

                      Moved

                      Comment

                      • #12
                        MET1
                        CGN/CGSSA Contributor - Lifetime
                        CGN Contributor - Lifetime
                        • Nov 2007
                        • 379

                        USGI Surplus ballistic Sun,Wind,and Dust shooting goggles $10-12

                        I have several sets of USGI Sun,Wind,and Dust goggles with ballistic lenses. Each pair is individually packaged in its original box and contains a new set of goggles(still in the wrap), a set of clear and a set of grey lenses, a lens protector, and an instruction booklet.

                        These make an excellent low cost safety goggle for shooting. There is no chance of your brass landing between these and your eyes. You can wear sun glasses or prescription glasses underneath them as well.

                        Before you ask, I am not sure what ballistic protection they offer. Please pass them up if you intend on buying a set and wearing them while your buddy tests out his reloads on your face. These are not for you!!

                        $12 each or 2 for $20 plus actual shipping. I can also meet you at Turner's in San Bernardino for FTF.







                        Comment

                        • #13
                          MET1
                          CGN/CGSSA Contributor - Lifetime
                          CGN Contributor - Lifetime
                          • Nov 2007
                          • 379

                          Sold out USGI Ammo cans $10 each Inland Empire

                          SOLD OUT



                          Description:These are surplus 40mm ammo cans designed to hold 32 rounds of high explosive dual purpose grenades for the MK-19 40MM grenade launcher. They are also known as PA-120 cans. (Grenades not included)

                          Condition:These cans are used US surplus. They are in very good condition. They may have minor dents or dings. Uncle Sam painted over the markings with FDE paint. Some of them have stickers on them (barcodes) and some don't. The seals are in perfect shape and maintain airtight/watertight capability. There may be VERY MINOR rust on the corners of the cans where the paint rubbed off from being stacked on top of each other. Once again, these are used and not new. (See pics)


                          Dimensions:They measure approximately 17 1/4 inches long on the inside, and 18 1/4 long on the outside, they are 5 1/2 inches wide on the inside and 6 1/2 inches wide on the outside, and 9 1/2 deep on the inside and 10 1/4 inches tall on the outside.


                          Additional Information:
                          • Holds approximately 2 1/4 times more then a .50 cal can.

                          • The cans are hinged on both ends, allowing the removal of the lid. They won't fall over when empty like other cans.

                          • These things stack like adult sizes Lego blocks. Each corner has a raised tab to guide the can placed above it into perfect alignment.

                          • The seals on these cans are considerably wider then on .30 cal or .50 cal cans. They are water/air tight.


                          • These cans hold 40 30 round AR mags, and even loaded, they are still light enough to move around without too much effort(perfect for bugging out)

                          • These are perfect for storing bulk ammo, magazines, or equipment that needs to be protected from the elements.

                          • Holds approximately 2000 rounds of 7.62X39MM,1700 rounds of .308, 1200 rounds of 8mm or 300 rounds of .50 cal or a billion rounds of .22LR.

                          • These cans came with their original lids attached so all of them lock up properly.

                          • Many other uses such as an ammo can stove, center console for a Jeep, saddle bag for MC, ect

                          • These are the perfect accessory for your Cal Compliant Mk-19.

                          • Original Dings, dust, dirt and junk included with each can at no additional cost.

                          • Inspection prior to purchase is expected and welcomed, I want you to be satisfied with the cans



                          All this for $10 each.



                          Please IM me if you have any questions. I am usually available in the evenings during the week. To save us both some time, I will not drive 50 miles on my dime to drop a single can off at your house. Price is fixed so lowballers please don's ask. I am in the San Bernardino area. Thanks in advance!

                          Comment

                          • #14
                            MET1
                            CGN/CGSSA Contributor - Lifetime
                            CGN Contributor - Lifetime
                            • Nov 2007
                            • 379

                            Blackhawk Coyote Buttstock Magazine Pouch fits AR's, Mini's etc. $7 each 3 for $20

                            I have several of these. They are new in the wrapNO PAYPAL. $5 shipping per order.










                            Last edited by MET1; 02-05-2016, 8:43 PM.

                            Comment

                            Working...
                            UA-8071174-1