Tweet
Hopefully I didn't waste all my time processing this stuff. I built a custom .308 and have moved to Lapua brass (not sure it was worth it, but oh well)
It's ALL LC, but various years.
This is not range pickup. It is once fired military and LE brass. It was purchased from a reputable dealer. I've been using brass from this dealer for the better part of a decade.
I used this brass to shoot sub 3/4 minute groups from a stock Savage 10 FCP SR all day every day. Granted it took me a ton of time and money in components to get there, but this brass will make sub MOA loads all day. I loaded them hot and got anywhere from 8-10 firings before the necks started to split and got case head separation. Needless to say, it's thick, heavy brass.
The brass I'm selling is the remainder of my "unused by me" supply.
It's fully processed and guaranteed to fit in any firearm. When I received this brass this is how I processed it before my first firing.
My process is:
Deprime
Primer pockets checked
Swaged on a Dillon Super Swage (As needed)
Wet tumbled
Dried
Annealed on a Mike's Reloading Bench Annealer
Resized on a Dillon 650 with an RCBS Black Series Small Base Die to min SAMI spec
Trimmed on a Henderson Precession Trimmer (Trimmed, Chamfered, Debured)
Tumbled in a propriety combination of walnut and corn cob media
Flash holes double checked
All you need to do is:
Load
Shoot
Rinse and repeat
I have handled and examined this brass multiple times during the process. As such, I'm 99.9% sure there is nothing but the quality LC Brass I have described in this lot, but because I'm human their will be a minimum of 5% extra brass included with each shipment to make sure you don't get shorted and account for any mistakes I made (even though I don't make mistakes)
Now that that's out of the way:
I have 900 pieces of brass total and I have broken the lot down into 100 piece units.
All prices are shipped and remember you will get at least an extra 5% with each order (and probably a couple more)
100 Pieces ($0.70/each)
500 Pieces ($0.65/each)
All 900 Pieces ($0.55/each)
It's ALL LC, but various years.
This is not range pickup. It is once fired military and LE brass. It was purchased from a reputable dealer. I've been using brass from this dealer for the better part of a decade.
I used this brass to shoot sub 3/4 minute groups from a stock Savage 10 FCP SR all day every day. Granted it took me a ton of time and money in components to get there, but this brass will make sub MOA loads all day. I loaded them hot and got anywhere from 8-10 firings before the necks started to split and got case head separation. Needless to say, it's thick, heavy brass.
The brass I'm selling is the remainder of my "unused by me" supply.
It's fully processed and guaranteed to fit in any firearm. When I received this brass this is how I processed it before my first firing.
My process is:
Deprime
Primer pockets checked
Swaged on a Dillon Super Swage (As needed)
Wet tumbled
Dried
Annealed on a Mike's Reloading Bench Annealer
Resized on a Dillon 650 with an RCBS Black Series Small Base Die to min SAMI spec
Trimmed on a Henderson Precession Trimmer (Trimmed, Chamfered, Debured)
Tumbled in a propriety combination of walnut and corn cob media
Flash holes double checked
All you need to do is:
Load
Shoot
Rinse and repeat
I have handled and examined this brass multiple times during the process. As such, I'm 99.9% sure there is nothing but the quality LC Brass I have described in this lot, but because I'm human their will be a minimum of 5% extra brass included with each shipment to make sure you don't get shorted and account for any mistakes I made (even though I don't make mistakes)
Now that that's out of the way:
I have 900 pieces of brass total and I have broken the lot down into 100 piece units.
All prices are shipped and remember you will get at least an extra 5% with each order (and probably a couple more)
100 Pieces ($0.70/each)
500 Pieces ($0.65/each)
All 900 Pieces ($0.55/each)
Comment