Hogue Stock Set for Remington 870's- New Price

[Wildhawk66]

Withdrawn

HOGUE STOCK SET FOR REMINGTON 870 SHOTGUNS

The buttstock is lightly used but in excellent condition. The foreend is brand new and has never left the package.
Constructed by molding a super strong, rigid fiberglass that is OverMolded with the same rubber compound Hogue's famous pistol grips are made of. The fiberglass skeleton adheres chemically as well as mechanically to the rubber, resulting in a permanent bond. This innovative construction process provides the ultimate in a comfortable, non-slip super-smooth attractive finish that is durable, weatherproof and extremely quiet. A great addition to your waterfowl gun, turkey gun or any shotgun you use during cold, wet weather. Currently going for $60 at Cebelas.com where it has excellent reviews: http://www.cabelas.com/stocks-grips-...:referralID=NA

Only $30 in the San Jose area or an additonal $10 for shipping

[Wildhawk66]

Sold Pending Funds
As new, in 99% condition in original packaging. Used on an AR15 for 1 range trip. This scope is the best of both worlds as you can use the crosshairs and 1-4x adjustment for longer range shooting and then switch on the red dot when needed for close in work or low light shooting. This is a really nice clear, bright, scope and I am only selling because I opted to upgrade to the TA31RMR ACOG

This scope is selling on amazon for $402 and even after 32 reviews it has a full 5 star rating:

http://www.amazon.com/Bushnell-Elite-1-25-4-Rainguard-Riflescope/product-reviews/B0000A0AFX/ref=dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1

$300 in the San Jose Area or shipped for $10 more.

SPECS:
Additional Specs Here:
http://www.bushnell.com/products/sco...e4200/421424M/SOLD

SELLING ONLY THE UPPER IN THIS THREAD. IF YOU ARE INTERESTED IN THE COMPLETE RIFLE, PLEASE GO HERE: http://www.calguns.net/calgunforum/s...d.php?t=429789

Selling my DPMS LR-308 .308 Carbine Upper. This upper has been out on two range trips and has no more than 100 rounds through her. She shoots great and has never had an issue and I am only selling because I have decided to break the bank on an LMT MWS 308 if I can get one into CA for anything approaching what the other states are paying. The upper has been upgraded with a railed free float foreend and BCM Charging Handle. Specs list below:

DPMS LR-308 AP4 .308 Upper

• 16" 1/10 Twist Chrome Moly Matte Barrel
• DPMS Carbine Length Free Float Railed Handguard
• BCM Gunfighter Charging Handle (medium)
• Troy Rear Folding Sight

$975 in the San Jose area

[Wildhawk66]

SOLD

SELLING ONLY THE UPPER IN THIS THREAD. IF YOU ARE INTERESTED IN THE COMPLETE RIFLE, PLEASE GO HERE: http://www.calguns.net/calgunforum/s...d.php?t=429789

BCM Lightweight AR15 Upper. This upper was designed to be as light weight and fast pointing as possible and as pictured the entire rifle weighs only 6lbs 5oz. I had no intention of selling this one, but I came across a complete Noveske 14.5 that I couldn't pass up so here she is. She has only been test fired to insure gas block alignment and overall function (worked 100% with no issues during 20 rounds factory ammo).


UPPER SPECS:
BCM Factory Lightweight Carbine Upper

• 16" Lightweight Barrel 1/7 twist (HPT and MP Tested)
• 5.56 Chamber
• M4 Feedramps
• Chrome lined

Upgraded With

• Daniel Defense Lite 7.0 Rail System
• PRI Flip Front Sight/Gas Block
• BCM Auto Bolt Carrier Group (HPT and MP Tested)
• Battlecomp 1.0 Muzzle Brake
• Badger Gen II Tactical Latch

$950 in the San Jose Area

[Wildhawk66]

bump

[Wildhawk66]

bump

[Wildhawk66]

bump

[Wildhawk66]

bump

[gr86ss]

Per our PM I'll take the lightweight upper

SELLING ONLY THE UPPER IN THIS THREAD. IF
YOU ARE INTERESTED IN THE COMPLETE RIFLE, PLEASE GO HERE: http://www.calguns.net/calgunforum/s...d.php?t=429789

BCM Lightweight AR15 Upper. This upper was designed to be as light weight and fast pointing as possible and as pictured the entire rifle weighs only 6lbs 5oz. I had no intention of selling this one, but I came across a complete Noveske 14.5 that I couldn't pass up so here she is. She has only been test fired to insure gas block alignment and overall function (worked 100% with no issues during 20 rounds factory ammo).


UPPER SPECS:
BCM Factory Lightweight Carbine Upper

• 16" Lightweight Barrel 1/7 twist (HPT and MP Tested)
• 5.56 Chamber
• M4 Feedramps
• Chrome lined

Upgraded With

• Daniel Defense Lite 7.0 Rail System
• PRI Flip Front Sight/Gas Block
• BCM Auto Bolt Carrier Group (HPT and MP Tested)
• Battlecomp 1.0 Muzzle Brake
• Badger Gen II Tactical Latch

$950 in the San Jose Area

[Wildhawk66]

Bump

[Wildhawk66]

bump

[Wildhawk66]

bump

[Wildhawk66]

bump

[Wildhawk66]

Bump