SOLD!! AMD65 kit

[Wyseguy]

M1 carbine stock, probably Viet Nam era - $30+ shipping
M1 carbine wooden upper handguard, very nice condition - $15 + shipping
Romy top dust cover, a lot of missing paint, but will refinish nicely $12 + ship
Will meet FTF in San Fernando Vally, or near Oak Park to cut shipping costs.

[Wyseguy]

10/22 Green Mtn barrel

Sold pending funds to Lyte- I have a slightly used (less than 200 rds) Green Mountain Heavy barrel for sale. Stainless, 18", not fluted. Very accurate. Asking only $95.00 + shipping. Will be willing to meet in Oak Park/West Valley area to cut shipping costs.

[Wyseguy]

WTS VZ-58 fixed stock kit

I have a decent fixed-stock VZ58 kit that I bought on Gunbroker a week ago. Actually, I bought two of them, and I only need one. I am willing to sell it at MY COST before the shipping cost (since I bought two, I only had to pay shipping for one!). It includes a mag rebuilt kit! All for $200

[Wyseguy]

SOLD Bulgy AK74 kit - PICS added SOLD

SOLD
I have an all-matching excellent+ Bulgarian AK74 kit, with very nice wood furniture. Complete kit, but no mag. Comes with sling and bayonet (bayonet is not matching). Youl will not find a better kit. $600. I am willing to meet in SFV or Oak Park/Agoura area. If shipped, add $10.
The AK74 shoots the 5.45X39 cal. This ammo is currently cheap, and very accurate.
I forgot to mention that this kit is completly demilled and ready to build, no rivets remain in either of the trunnions. An Ak74 flat from AK-Builder is also part of the deal. Also included is a cleaning kit, oiler, stripper clips, cleaning rod, and all of the full auto parts come with the kit. You won't have to duracoat or parkerize anything, it's that good! The white spots you see on the wood is just the flash

[Wyseguy]

SPF Romy G kit - Pics added!

SOLD PENDING FUNDS
I have a nice matching Romy G kit that has been completely demilled and is ready to build. $300 if FTF (Agoura area, San Fernando Valley ok), $315 shipped.
Fist one to say "I'll take it" in a PM gets it.
This kit is as nice as some on Gunbroker selling for much more. I'm letting you Calgunners get first crack. Plus, it's demilled and ready to go!

Here's a few pics!



Even the Piston Guide Rod is matching!

There is a nick on the rear trunnion that happened during the demill process
It will not affect the build.

[Wyseguy]

SPF FAL Imbel kit SPF

I have nice Imbel FAL kit for sale. Imbel's are known for their quality and chrome-lined barrels. It's newly duracoted in tatical black. All parts stripped and cleaned individualy. A cut reciver stub is included just to hold everything together. Bore is excellent and shiny. Every part was disassembled and cleaned. The kit is 100% complete and ready to be built on a new receiver. LOWERED PRICE SPF $435 FTF SPF shipping +20.00 I'll also throw in a nearly new Buttstock and pistol grip w/cleaning accessories. This is also being offered on another Forum.





[IMG]http://i655.photobucket.com/albums/uu280/Wyseguy/FALKIT005.jpg[/IM[IMG]

[Wyseguy]

Sold All matching Romy Kit Sold

Sold and picked up!!!!I have one Romy kit that I just don't think I'm going to get around bulding. It's an all matching kit that doesn't look like it's been shot too much. No cracks in the furniture. Overall, a nice kit. Also included is a Tapco flat and a Tapco Fire control group (a $40 bonus) I'm selling it all for $300. Can meet FTF in San Fernando Valley, East Ventura County, Long Beach, or Covina area. If you need it shipped, it's $18 extra. If you'd like me to press out the barrel and remove all the rivets (except for the piston), add $20. This item is also for sale on another forum. The first PM with an "Ill take it" will get it.

[Wyseguy]

VZ58 30 rd mag rebuild kit

I have a used 30 round mag vz58 rebuild kit for sale. $30, includes shipping.
First "I'll take it" plus a PM gets it.

[Wyseguy]

WTS VZ58 kit w/mag -Barrel pressed out!! LOWERED (again, last time?)

I have a decent VZ58 kit (bore is excellent!) that is ready to build. The stock pin has been driven out and the stock has been removed, and best of all, the barrel has been pressed out of the receiver. Now you no longer need a 20 ton press or a barrel removal jig, and you can press it back in with a 12 ton press. Also includes a 30 rd rebuild kit. Most kits on Gunbroker don't include a mag, and if it does, they usually don't ship the mag to California. The bolt looks almost unfired. Also included is a vz58 cleaning kit.
It has a folding stock, and open-eared sights. Was $275 THEN $200 ftf, NOW $185add $18 for shipping. I live in the Oak Park area (Eastern Ventura County) or can meet in the San Fernando Valley, Covina-Glendora area, and some parts of Long Beach, (on Wednesdays only). I'd really to sell this because I already have a kit that I'm building (also, I need some extra cash for the Phoenix GS in Dec)

*NOTE- while the vz58 LOOKS like an ak, it really isn't, as no parts are interchangable. The vz58 is a milled receiver type, and will require a receiver from either OOW or ORF, unless you are really good with tools and can find an 80% receiver. Add to that a muzzle break which must be permanently attached, as the barrel is just a tad too short and you don't want to run into NFA territory for having a sbr (short barreled rifle), and a US made trigger group for compliance, and that is all you need

[Wyseguy]

SPF- Romy kit - all matching, very nice, ready to build! LOWERED PRICE

I have a VERY nice Romy G kit for sale. EVERYTHING matches-( front trunnion, bolt, bolt carrier, rear sight, gas tube, dust cover, recoil spring catch, even the safety selector!) . It is completely demilled and ready to build. The gas piston has been removed and replaced with a Tapco piston (a $15 dollar value) I haven't had time to drill a hole for the rivet and put the rivet on as yet. The wood has been stripped and is ready to stain with the color of your choice. (* note, the wooden top rail is cracked apart. It can be easily taken off and placed back on and then glued together when it's ready to be put on for the last time) or you can just use another one. Also included is the cleaning rod! (not a lot of kits include this item) I'll also throw in the rivets (another $6 dollar value) This is one of my nicest kits. WAS $350 SPF $325 obo, + shipping. Not pictured is the pistol grip and trigger guard, which are included, of course.

[Wyseguy]

SOLD!! AMD65 kit

SOLD AND DELIVERED
I have a decent AMD 65 kit (barrel in intact and excellent, bolt and bolt carrier are excellent as well) minor rust on handguards. The important parts are matching (front trunnion, barrel, bolt and bolt carrier). The rivets have been removed from the front trunnion. This was bought on Gunbroker as a matching kit (only the above mentioned parts were matching!) I THOUGHT it was supposed to be complete as well (It's missing a selector switch and a selector stop) It may also be missing something from the sidefolding stock as well, I'm not sure because I've never built an AMD kit before! The rivets on the rear trunnion were attempted to be removed, but the jerk who did it didn't get the drill straight, and a small drill hole is present just above the rivet (I'll post a pic) This really shouldn't affect the build, but I want you to know. After I bought it, I thought I'd use it for a pistol build, but changed my mind. My loss is your gain. I paid $285 for this on Gunbroker a little over a month ago, and am willing to let it go quickly for $140. SPF This would make an excellent pistol build. Shipping will be $12 extra!