Spare Parts: Primary Arms red dot, grips, flash hider

[Rich1911]

Everything pretty much brand new. Installed everything, went to the range once, then it went into the safe. Funding my 1911 build.

Located in Long Beach

Will trade for another weapon light with pressure switch, rifle bag, 10/30 pmags, or 1911 magazines


Recover cc3h with Talon grips rubber grip tape made for the recover grip: 50

Recover holster (active) for the 1911 using the recover grip system: SOLD

Valkyrie Dynamics gr1 bushing compensator/muzzle break: SOLD

Olight Valkyrie pl-2. Comes with 2 extra Olight batteries, and a box of 6 Amazon basic batteries...so 9 altogether (was a panic buy to make sure I would never run out of batteries at the beginning of the whole covid thing): 100

Here’s a pic with everything installed (minus the holster)

https://i.imgur.com/GZD1Xd2.jpg

https://i.imgur.com/ZhTuB9T.jpg

https://i.imgur.com/ZUv3HHn.jpg

https://i.imgur.com/KQwvvbV.jpg

[Rich1911]

1911 Smith and Alexander Magwell with Wilson Internals, VZ Recons

Located in Long Beach.

Bought everything on 7/9 and installed everything 7/14. Didnt like the fitment and bothers me enough to take it off--im very picky...

Figured I'd see if anyone wants it here before i send it back to Brownells. Prices are pretty firm.

Will not separate the magwell/internals.

Smith and Alexander 1 piece MSH/magwell with Wilson 23lb mainspring, mainspring cap, and mainspring pin retainer (part numbers r16a, r16b, and r16c). Great for Sprinfield owners wanting to get rid of the ILS. Magwell has some slight scratches due to inserting magazines for testing - $115

VZ Recon Grips, dirty olive color, standard fit, thumbwell notch, magwell cut. Will include Wilson Combat grip screws that were purchased at same time. $65 with screws, $60 without.

Dont have individual pictures, only with them installed on the gun. Everything currently still on. Will take off when there is a buyer(s), or when my new standard cut grips come in.

[Rich1911]

WTT: 10/30 Pmag M3 for Lancer 10/30

Located in Long Beach

Looking to trade my black Pmag for a Lancer. Has about 5 reloads through it using a BF10 Loader. Having issues with double feeds and BF recommends using Lancers, so I want to try it out to see if this helps.

[Rich1911]

[Rich1911]

Magpul furniture with PSA lower parts kit

Everything is brand new. I ordered this combo and received it today. I only needed the upper (Minus the handguard) and MBUS, but had to buy everything as a kit due to inventory.

https://palmettostatearmory.com/psa-16-carbine-length-m4-5-56-nato-1-7-nitride-moe-ept-rifle-kit-rear-mbus-516447449.html

Magpul grip, stock, trigger guard, handguard, PSA lower parts kit with their EPT trigger, buffer kit

Located in Long Beach. Prefer FTF.

I’ll have pictures up later tonight

****SOLD****

[Rich1911]

Spare Parts: Primary Arms red dot, grips, flash hider

Located in Long Beach

Primary Arms Red Dot with UTG riser mount. Came on my rifle when I bought it, dont know much about it. I upgraded right away. Was going to use it on a new build but ended up buying a new one. Full disclosure, Recently, I mounted it on a new build just to test and dry fire. I noticed that when its on the brightest setting (level 11), when I release the bolt, it shut off. Its like it moved inbetween off and level 11. If I change it to level 10, it goes back on. Or, if I cycled again, it turned back on as well. It does not do this all the time. However, it didnt do it on any other setting. Maybe its the battery coming loose, or the battery is getting low since it only did it on the brightest setting? I dont know. ***SOLD***





Featureless Grip. Also came as an extra with the same rifle. Looks like there was some "custom" DIY stipple work done: 5



CMMG pistol grip. Brand new, came in the lower part kit I used: 5


CMMG trigger guard. Brand new. Also came in the lpk: 5


PSA Flash Hider. Brand new take off from a PSA upper: 5


***take the rest for 10 bucks***