SOLD Dillon D-Terminator powder scale SOLD

[RandyD]

SOLD I have a used Dillon D-Terminator powder scale for sale. Dillon sells this scale for $139.95. I will sell mine for $90.00 and cover the actual cost of shipping. The scale looks and works like it is new. I am selling this because, I am using a different powder scale. The scale comes with a powder pan, a cover to prevent air currents from affecting the scale, and a 700 grain brass weight used to verify the scale's accuracy. As you can see from the photo, the scale is indicating that the 700 grain brass weight, weighs 698.5 grains. This was the same measurement when I purchased the scale new from Dillon, which indicates that either the scale or the brass weight is off by only .21%

SOLD

[RandyD]

bump

[JDay]

Does it calibrate?

[RandyD]

Yes, it calibrates when you turn it on.

[RandyD]

bump

[Squ1dward]

I would be interested for $75 due to the scale potentially being off a fair amount.

[RandyD]

I would be interested for $75 due to the scale potentially being off a fair amount.

Sorry it took me so long to respond to your post. I believe you read my comment incorrectly about the percentage of error indicated on the scale. The weight is supposed to be 700 grains, but it could actually be 698.5 grains as the scale indicates. I do not have another known weight to measure to verify if the scale or the weight is off. However, a deviation of 1.5 grains in a 700 grain weight is an error of approximately one fifth of 1%, which is negligible, and as I stated above, this was the same measurement that I took when I first purchased the scale, so the scale has remained consistent.

[RandyD]

bump

[RandyD]

bump

[RandyD]

sold