Tweet
Location SF BAY - EAST BAY
WTT .357/.38 Dillon Dies and .357/.38 Dillon 550 Caliber Conversion Kit for a 9mm or .45acp Dillon 550 caliber conversion kit and dies. I could also do just conversion kit for conversion kit and sell the dies separate. Withdrawn, sorry.
Uniflow Powder measure $50 + shipping or ftf
Also have either new or near new RCBS dies in 7.62x39 (russian). Never used by me and does not look to ever be mounted or screwed into a press. $24 + shipping if needed. SOLD
Lee Safety Magnetic Powder Scale 100 Grain Capacity $10
RCBS Rotary Case Trimmer w/3 different collets (upgradeable to trim pro if desired), cutter included but no caliber pilots. $50
NEW RCBS Powder Trickler $8 SOLD
RCBS Auto 4x4 Progressive Press $125 This press is missing parts to make it an auto indexing press but it does work as a multi stage press. RCBS was more than willing to provide the missing parts if i provided them with part numbers of the parts missing. I use it as a 'multi stage' press for pistol calibers. 1st station is decap & resize, I manually index to the 2nd station which has the expander die. I prime with a primer tool, then I charge on a uniflow powder measure. Then I bring it back to the press and seat the bullet in station 3 and crimp on station 4. This is a good press to learn on while not having to remove and replace/calibrate each die like on a single stage press. Keep in mind you can make this an auto indexing press if you call RCBS with the parts that you need to get it going. You will need to look at the schematics sheet and write down the parts. Withdrawn, on hold
Uniflow Powder measure $50 + shipping or ftf
Lee Safety Magnetic Powder Scale 100 Grain Capacity $10
RCBS Rotary Case Trimmer w/3 different collets (upgradeable to trim pro if desired), cutter included but no caliber pilots. $50
Comment