Tweet
A friend of mine made these custom take-down pin install tools for the AR15 (red) and AR10 (blue).
He made a small run of them (10 each) and wants to gauge interest to see whether it's worthwhile to make more.
They are made of aluminum, and finished in type 2 anodizing; there is a recessed area in the back for the take-down pin to rest in, and for remaining centered while being pushed through during installation.
They are$12.50 $8.50 each, or $20 $15 for both, shipped via first class (with tracking included).
Video of how easy the take down pin can be installed on an AR10:
A simple step-by-step via pictures:
1. Install the spring and set the intentation in the hole.
2. Press the pin down with the tool while pushing the tip of the tool into the pin hole on the lower.
3. Place the take-down pin in the recessed area of the tool and push them both through, making sure the pin engages the track of the take-down pin.
He made a small run of them (10 each) and wants to gauge interest to see whether it's worthwhile to make more.
They are made of aluminum, and finished in type 2 anodizing; there is a recessed area in the back for the take-down pin to rest in, and for remaining centered while being pushed through during installation.
They are
Video of how easy the take down pin can be installed on an AR10:
A simple step-by-step via pictures:
1. Install the spring and set the intentation in the hole.
2. Press the pin down with the tool while pushing the tip of the tool into the pin hole on the lower.
3. Place the take-down pin in the recessed area of the tool and push them both through, making sure the pin engages the track of the take-down pin.
Comment