Anodizing

[Lovetobuild]

I am starting up the group anodizing once more. Tomorrow will be first drop off, anyone interested should email or call me to set up drop. Must be before 3pm.
Cost will be 20.00 if bought from us and 35.00 if bought from someone other then us. Use email clint080808@yahoo.com or call me at 650-537-6737

[Lovetobuild]

This week

I am setting up one more for Monday as I could not get everyone in. Limited space so if not in a hurry I will do another in 2 weeks.

[Lovetobuild]

Group build 6/15

So here we are couple of changes. It takes 15 min per now adverage. This does change from person to person. So if you have more then 2 set appointment for 2 per. So 4 ever hr. we have more then 1 mill so we are going to be renting 2 out. So the max is 8 units per hr. yes slow but we want you to be slow and careful as if you are not you can go right through the bottom. We have done a lot on this milling machine and 99% have come out looking like the old CNC one you guys
We have made more changes and have gotten the times down quite a bit! We have brought in more mills and now have a easy drill jig set up so this is now done with out changing a bit! We should be at 10 builds per hr very soon right now we can do 6-8 and that's great but we want to be at 10 for you guys by July
We will make it happen and we will do it within the law. For you who came to the first build u know how slow it was, well that is fixed now and the hold process has gotten more and more streamlined as it will continue too till we are handling all the demand. For any group that has 5 or more we are going to hold privite builds if you would like even durning the week mon-fri any group with 10 or more please set up privite build, Sat. really are for the singles and doubles. If Sat is your only day please call me or email me and I will get you in first or last whatever works better for you.
This should be first week back where you guys will get in and out without long delays "SHOULD" lol it work really well last couple of days.
See you all there
Pricing is as follows
100.00 for any 1 AR15 paperweight that is not ours.
80.00 each for 2 or more AR15 paperweight or any 80receiver paperweight
AR10s and AR308 paperweights are a go
So any AR paperweight now can be done no problem.
Also DIY paperweights are good to go as well and if you want to finish any 50 or more that's good too will cost a little more as you will be renting more equipment and taking longer, that will be given to you "price" after we see it. Must warn you if the mag well is not done chances of you doing that right the first time are very slim but you choice.


Here is the scheduler www.80receiver.com/builds
Will see you there