Tweet
*Expired
RS Regulate AKM Aimpoint 30mm Upper Mount $65
For Aimpoint and similiar 30mm optics, this AKM mount is compatible with all AK-300 lower mounts.
It positions 30mm tube optics in a co-witness location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 2 ounces.
MADE IN THE USA
RS Regulate AKMD Bushnell TRS-25 Upper Mount $65
For Bushnell TRS-25 and similiar optics, this AKMD mount is compatible with all AK-300 lower mounts.
It positions fixed base micro red dot optics in a co-witness location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 1 ounce.
MADE IN THE USA
RS Regulate AKML Aimpoint Micro Upper Mount $65
For Aimpoint Micro and similiar optics, this AKML mount is compatible with all AK-300 lower mounts.
It positions Aimpoint Micro optics in a co-witness location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 1 ounce.
MADE IN THE USA
RS Regulate AKOG Trijicon ACOG Upper Mount $73
For Trijicon ACOG and similiar optics, this AKOG mount is compatible with all AK-300 lower mounts.
It positions fixed-base magnified optics in an optimal over-bore location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 2 ounces.
MADE IN THE USA
RS Regulate AKR Picatinny Rail Upper Mount $73
For any Picatinny rail mounted optics, this AKR mount is compatible with all AK-300 lower mounts.
It positions Picatinny rail mount optics in an optimal over-bore location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 2.5 ounces.
MADE IN THE USA
RS Regulate AKM Aimpoint 30mm Upper Mount $65
For Aimpoint and similiar 30mm optics, this AKM mount is compatible with all AK-300 lower mounts.
It positions 30mm tube optics in a co-witness location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 2 ounces.
MADE IN THE USA
RS Regulate AKMD Bushnell TRS-25 Upper Mount $65
For Bushnell TRS-25 and similiar optics, this AKMD mount is compatible with all AK-300 lower mounts.
It positions fixed base micro red dot optics in a co-witness location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 1 ounce.
MADE IN THE USA
RS Regulate AKML Aimpoint Micro Upper Mount $65
For Aimpoint Micro and similiar optics, this AKML mount is compatible with all AK-300 lower mounts.
It positions Aimpoint Micro optics in a co-witness location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 1 ounce.
MADE IN THE USA
RS Regulate AKOG Trijicon ACOG Upper Mount $73
For Trijicon ACOG and similiar optics, this AKOG mount is compatible with all AK-300 lower mounts.
It positions fixed-base magnified optics in an optimal over-bore location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 2 ounces.
MADE IN THE USA
RS Regulate AKR Picatinny Rail Upper Mount $73
For any Picatinny rail mounted optics, this AKR mount is compatible with all AK-300 lower mounts.
It positions Picatinny rail mount optics in an optimal over-bore location by allowing nearly 0.25" side-to-side gross windage adjustment.
A blind pin guide machined into the mount allows the end user to permanently set optic position after zeroing.
This mount allows complete field stripping of the rifle without removal of the optic on most Kalashnikov variants in forward positions.
Made from 6061-T6 aluminum and MIL-A-8625 type III hard coat anodized.
Only weighs 2.5 ounces.
MADE IN THE USA
Comment