Unconfigured Ad Widget

Collapse

...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Evolved
    Member
    • Aug 2013
    • 157

    ...

    ...
    0
    Noveske Afghan Match 14.5" CHF
    0%
    0
    FN 14.5" CHF
    0%
    0
    BCM Socom 14.5" non-CHF
    0%
    0
  • #2
    Khromo
    Senior Member
    • Dec 2012
    • 742

    This is a pretty good barrel. I have built uppers using this one and the 16" version and they shoot a little under 1 MOA with no problems. The chrome lining will help with durability, and the weight sounds right about where you want it. If you don't want the chrome lining you can save $70 with the "standard" model, and maybe get slightly better accuracy.

    This BCM barrel is a stripped, 14.5" mid-length gas, cold hammer forged barrel with gas ports installed and dimpled for a strong gas block installation.


    The 1-7" twist may not be optimal for most guys, but it doesn't sound like a problem for you. I think all the ones you listed were 1-7's.
    "Self defense is not a fashion show. A defensive handgun is not a little black dress, or a purse."
    Remember, the overwhelming majority of anti-gun thinkers are not stupid enough to be "afraid of guns." They are afraid of stupid/immature/crazy psycho people with guns.
    And as always, being friendly, courteous, and respectful is the easiest way to bend people to your will.

    Comment

    • #3
      jbooker9
      Senior Member
      • Feb 2009
      • 980

      Out of those barrels the noveske would be the most accurate, due to it being stainless and also the medium contour of the barrel will help. Can't say I would ever buy a noveske but if you are set on 14.5 it seems to be the best of the ones you posted

      Comment

      • #4
        baih777
        CGN/CGSSA Contributor
        CGN Contributor
        • Jul 2011
        • 5680

        you can buy local.
        http://www.riflegear.com/c-92-barrels.aspx#Filter=[EntityIDs=@(26)@(35)@*Sort=3*ava=0]
        Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
        I really miss the good old Pomona Gun Shows.
        I'm Back.

        Comment

        • #5
          milotrain
          Veteran Member
          • Apr 2011
          • 4301

          Your list is not that demanding. I think you'll be fine with damn near any 14.5" barrel out there, although maybe not with crap ammo. I'd get the cheapest chrome lined barrel I could find.
          weg: That device is obsolete now. They replaced it with wizards.
          frank: Wait a minute. There are more than one wizard? Is [are?] the wizard calibrated?

          Comment

          • #6
            SuperSet
            Calguns Addict
            • Feb 2007
            • 9048

            You planning to shoot match ammo (i.e. 69/77 grainers) out of your 14.5, to get 1MOA?

            Comment

            • #7
              ElvenSoul
              I need a LIFE!!
              • Apr 2008
              • 17431

              OP how tall are you? and how much do you weigh? Might be more happy with a 18" barrel.
              sigpic

              Comment

              • #8
                morthrane
                Senior Member
                • Feb 2006
                • 954

                Originally posted by Evolved
                Edit: how important is it to have a carbine-length gas system on a 14.5" barrel vs. a mid-length one? Carbine length retains the 7" of dwell after the gas port per the original design of the weapon and the original cartridge design. Referencing this article: http://www.sadefensejournal.com/wp/?p=1093
                Like to hear the expert opinion on this, but my understanding is the carbine gas is ideal for 14.5 based on dwell time. For 16 and 18", mid-gas is ideal.

                Comment

                • #9
                  toddh
                  Banned
                  • Dec 2010
                  • 1914

                  Here's one....search harder.








                  .
                  Last edited by toddh; 01-27-2015, 11:23 PM.

                  Comment

                  Working...
                  UA-8071174-1