Glock 20T(Lone Wolf Slide)

[DrJeds44]

Curios if you guys might be able to help. Recently assembled a 20T from a Lone Wolf slide and barrel. Everything went right together, but now when I try to pull the trigger the slide moves to the rear. I bought slide parts kit from Lone Wolf as well, possibly striker out of spec. If the hook is too long as you pull trigger the the slide could be pulled back rather releasing the striker? I have changed the channel liner and installed it with appropriate tool from Brownells. It looks awesome but is just a paper weight at this point. Someone must have the fix. Thanks

[bigcalidave]

Something is sticking, or the striker spring is too strong for your recoil spring. You need the inspection plate rear cover, or cut the bottom half off a real cover and watch what is going on in there. The slide shouldn't be moving unless the springs are wrong though. Maybe you assembled it wrong, Take it apart and verify that all the parts are in the correct place with that striker.

[DrJeds44]

Double checked everything. Thinking about replacing all parts with Glock OEM and giving that a try.

[DrJeds44]

Replaced all parts in the slide with OEM Glock problem solved. Just need to hit the range now. Thanks for the replies.