chipmunk extracting problems

[mdib870]

hey guys i just bought a little chipmunk rifle and I'm having some extracting problems looks like the extractor plunger is stuck all the way down so the extractor claw is just kinda floating

any idea on how to fix this?

[tr6guns]

Probably the spring is collapsed or its dirty, spray some WD40 on it and see if it releases. If you need a new spring here is a place that has them.
Have the serial # of the gun handy to get the right parts for your gun.

http://store.crickett.com/replacement-rifle-parts/

Go here for a picture of the parts breakdown..

http://www.docstoc.com/docs/28930297/Chipmunk-22lr-Single-Shot-Rifle-Manual

[john323]

DO NOT USE WD40! If you can remove the extractor and attempt to remove the spring.If you are not able to remove the spring spray KROIL in the hole and leave it to work.If still unable use a dental pick to remove the spring and replace it with a new one.