looking for a custom gunsmith in SF bay area

[dhagerty]

ok, I am looking for a custom gunsmith to Rebarrel a Remingtom XP-100 to IHMSA Requirements. I already have a Krieger Barrel blank.

this is what I need done:

1. cut barrel to proper length
2. contour barrel and possibly flute the barrel
3. thread, chamber, crown and fit barrel to action
4. perform final finishing
5. drill and tap barrel for iron sights

The action has been trued by another gunsmith the last time it was rebarreled.

Greg Wilson used to do a lot of work for me, but he no longer lives in California and is no longer doing gunsmithing.

Anthony Pettiti has been recommended, but I know nobody who has built a rifle for them

and for curious people

An XP-100 is a Bolt Action single shot pistol Based on the Remington 600 Action.

IHMSA stands for International Handgun Metallic Silhouette Association

any help would be greatly appreciated

[freonr22]

kendog?

[DazedandConfuzed]

You could check with:

Marc Soulie
Spartan Precision Rifles
2128 N. First St. Unit C
San Jose, CA
95131
(408) 451-9850

[ar15barrels]

If you were to visit the Los Angeles area, I do this work within a few hours on a walk-in appointment.

[bsumoba]

Spartan Rifles out of San Jose, but check with him as he might not work on that type of firearm.

KenDog out of Aptos...also check and see if he can do it.

Randall (AR15barrels) out of SoCal. Advantage to this is you get it done in a day when going down there rather than waiting 2-5+ months with the guys above (and he already mentioned he can do this ) The bay area smiths both very busy but it is worth it if you can't make it down south the Randall...I know Spartan super busy and will probably quote you 2-5+ months assuming they can do it.

[kendog4570]

KenDog out of Aptos...also check and see if he can do it.

He can.

Right now I have a 1 month back log on barreling jobs with all the parts present at time of drop off. That's just the way it is. The other folks just got here before you. Some line items (fluting) are sent to other vendors, and add to the time frame. I have a license so you can leave it with me. Also 1 million liability policy specifically for gunsmithing.
Please let me know if I can help.

[bsumoba]

He can.

Right now I have a 1 month back log on barreling jobs with all the parts present at time of drop off. That's just the way it is. The other folks just got here before you. Some line items (fluting) are sent to other vendors, and add to the time frame. I have a license so you can leave it with me. Also 1 million liability policy specifically for gunsmithing.
Please let me know if I can help.

I knew you would chime in

[dhagerty]

He can.

Right now I have a 1 month back log on barreling jobs with all the parts present at time of drop off. That's just the way it is. The other folks just got here before you. Some line items (fluting) are sent to other vendors, and add to the time frame. I have a license so you can leave it with me. Also 1 million liability policy specifically for gunsmithing.
Please let me know if I can help.

I will certainly consider you but It is a good ride up to you. But, I have had to put it on the backburner due to working 6 days a week.

I am patient.. last time I had a rebarrel done, it took 9 months. but 6 months was waiting for the new barrel.

[dhagerty]

If you were to visit the Los Angeles area, I do this work within a few hours on a walk-in appointment.

you are a ways away. But I have a friend of mine that lives near you that needs the same work done and I will pass on your information.