SKS malfunction! need some help again

[CaliforniaRepublicShooter]

I need someone who works on sks'... I have a neck of a casing stuck in the chamber. It's a Chinese milled "paratrooper"... need someone to correct this I$$UE... thanks

[jkgts1]

Maybe a wooden dowel or aluminum rod from muzzle end, tap it out? Not sure if there is an edge to catch so it can be driven out. Good luck.

[JaredKaragen]

ACE Hardware. Look for their container with different size bar and tube stock... round and square.


They sell a .222 round brass rod, bigger and smaller.


Just drop it into the muzzle several times.... the casing will come out.

Then clean your SKS.... lol


You shouldnt need to tap too hard.

We had a barrel that a bullet got lodged into once and this removed it.


Hope it helps!

[a308garand]

100-003-128WB
7.62 x 39 Broken Shell Extractor

$10.99

http://www.brownells.com/gunsmith-tools-supplies/handgun-tools/stuck-case-removers/broken-shell-extractors-prod24626.aspx

[6mmintl]

try a .35 cal. brush on a strong rod pushed halfway into the neck and pull back towards rear.

[wpage]

For a SKS +1 one on tap out with a old .22 cleaning rod. Those SKS barrels are very tough...

[LCU1670]

broken shell extractor, you will need it for the future as well.

[CaliforniaRepublicShooter]

So is the broken casino games neck caused by km proper head space or a thrashed/dirty barrel?

[wpod]

Surplus rifle, surplus ammo. Stuff happens.
Broken shell extractor is your friend.