I need help finding a shotgun barrel.

[ArmedCMT]

Ive been keeping an eye on Corson's and gunbroker but Im hoping my fellow calgunners may have some other sources theys be willing to share.

Im looking for a donor barrel for my 20ga Remington model 11. I have the numbers matching 28" barrel for it, but im looking for something to have chopped down for range fun.

[ar15barrels]

You might have better luck finding a missing 777 on the bottom of the indian ocean.

[ArmedCMT]

You might have better luck finding a missing 777 on the bottom of the indian ocean.

So your saying there's hope...

I keep finding them in 12ga & 16ga but nothing in 20ga


Edit: Maybe its time to start looking for a complete 20ga in rough condition, I can chop its barrel and strip the receiver for spare parts.

[ar15barrels]

So your saying there's hope...

I keep finding them in 12ga & 16ga but nothing in 20ga

I have SEEN lots of model 11's in 12ga and 16ga and even in 410, but I don't think I have ever run across one in 20ga.
I'm guessing they did not make a lot of them.
Perhaps 20ga replaced 16ga in the market after the time that model 11's were mostly being sold so only a few 20ga guns were made before the switch to the 1100...

[Ed_Hazard]

Would this work?

http://www.ebay.com/itm/Remington-Arms-Model-11-Barrel-20-Gauge-Full-Choke-gun-parts-/121342094468?pt=LH_DefaultDomain_0&hash=item1c408d6c84

Remington Arms Model 11 Barrel

20 Gauge, Full Choke

19 1/4"

Cut Cylinder Bore

Drilled & Tapped for Front Sight

Barrel Extension Missing

[kcstott]

How about this one.Barrel

[ArmedCMT]

Would this work?

http://www.ebay.com/itm/Remington-Arms-Model-11-Barrel-20-Gauge-Full-Choke-gun-parts-/121342094468?pt=LH_DefaultDomain_0&hash=item1c408d6c84

Remington Arms Model 11 Barrel

20 Gauge, Full Choke

19 1/4"

Cut Cylinder Bore

Drilled & Tapped for Front Sight

Barrel Extension Missing

Is the barrel extension what threads on to the barrel and fit into the receiver?

How about this one.Barrel

I think you found it!! 5days left and someone is bidding on it...Ill have to get me one of those bid snipers

Thanks guys. I dont know why I never think of fleabay

[ar15barrels]

Is the barrel extension what threads on to the barrel and fit into the receiver?

The barrel is pretty useless without the extension as that is what slips into the receiver and the bolt locks into it.
People re-use extensions and have new barrels made to fit them.
That's why you run into barrels without the extensions on them.

[ArmedCMT]

The barrel is pretty useless without the extension as that is what slips into the receiver and the bolt locks into it.
People re-use extensions and have new barrels made to fit them.
That's why you run into barrels without the extensions on them.

But this one looks right, correct?? You could chop this and put a bead sight on for me right?

[ar15barrels]

But this one looks right, correct?? You could chop this and put a bead sight on for me right?

That one looks fine.
I can shorten it and put a bead on it.
It's up to you to tinker with it to get it to function with the shorter barrel.

[ArmedCMT]

That one looks fine.
I can shorten it and put a bead on it.
It's up to you to tinker with it to get it to function with the shorter barrel.

Of course, I just need it chopped and re-sighted. Ill let you know when I have it in hand