Unconfigured Ad Widget

Collapse

Adding AK Scope rail

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • armandolo
    Senior Member
    • Dec 2007
    • 678

    Adding AK Scope rail

    Hey guys, I have an already build AK type rifle and wanted to know if its possible to add a scope rail and how hard would it be. Is it easy that one can do or a gunsmith needs to do it?

    Any thoughts whould be appreciated.
  • #2
    JeffM
    Veteran Member
    • Sep 2007
    • 4359

    If you've built AKs before, it's pretty simple, just lining everything up right and using rivets of the proper size.

    If you haven't built an AK before, it's probably wise to let someone else who has do the work.

    IIRC there are kits to attach them with screws, but I haven't done much research into those.

    Comment

    • #3
      Python2
      Senior Member
      • Apr 2006
      • 906

      Originally posted by armandolo
      Hey guys, I have an already build AK type rifle and wanted to know if its possible to add a scope rail and how hard would it be. Is it easy that one can do or a gunsmith needs to do it?

      Any thoughts whould be appreciated.
      Why would you want to put a scope on an AK when the darn thing is so in-accurate for long distance shooting. I can see putting one on an AR but certainly a waste on AK.
      Pinoy Bwana

      Comment

      • #4
        kdm
        Senior Member
        • Jun 2008
        • 611

        Ultimak mount system (~$100) and an Eotech 512. Excellent combo.

        Comment

        • #5
          armandolo
          Senior Member
          • Dec 2007
          • 678

          Well I like shooting from a scope and to top it of I have three scopes for my Dragunov (not the PSL). So I thought I can use the scopes I have.

          Comment

          • #6
            M. Sage
            Moderator Emeritus
            CGN Contributor - Lifetime
            • Jul 2006
            • 19759

            Originally posted by Python2
            Why would you want to put a scope on an AK when the darn thing is so in-accurate for long distance shooting. I can see putting one on an AR but certainly a waste on AK.
            Oh, that's it.. you're going to have to shoot my AK. They're inaccurate because the sights suck.

            Originally posted by kdm
            Ultimak mount system (~$100) and an Eotech 512. Excellent combo.
            This is the route to go. I put a side rail on my AK, got it lined up "well enough", though it's not perfect, and I wish I'd have gone the Ultimak route. I still might...

            If you want to line up a side rail to your AK, IMO the way to do it (the way I'd do it if I had it to do over again, and still wanted a side rail instead of an Ultimak) would be:

            1: Locate the rail's rough location. Locate and drill one hole, probably the front one. It should be roughly parallel to your top rail, though that's how I located mine, and it's pointed down a little...

            2: Use a screw or start to smash a rivet into that hole. Don't smash it tight! It should move hard, but you want to be able to pivot the rail slightly.

            3: Mount an optic that allows you to use your sights, too (like a POSP), center the crosshairs/reticle, stabilize the rifle and aim at something a fair distance away (around 50 yards). Compare to where your sights are aiming.

            4: Bump the rail up or down to get the optic aimed almost precisely where the sights are aimed.

            5: Locate and drill the last hole, smash the rivets or tighten your bolts and call it a day.
            Originally posted by Deadbolt
            "We're here to take your land for your safety"

            "My Safety?" *click* "There, that was my safety"
            sigpicNRA Member

            Comment

            • #7
              valleyrat
              Senior Member
              • May 2007
              • 587

              Originally posted by Python2
              Why would you want to put a scope on an AK when the darn thing is so in-accurate for long distance shooting. I can see putting one on an AR but certainly a waste on AK.
              They are as inaccurate as the shooter. If you do your part, the gun will perform well enough. There is some compromise of accuracy for reliability, but I would prefer a 2" reliable gun to a .25" unreliable POS

              Comment

              • #8
                Josh3239
                Calguns Addict
                • Dec 2006
                • 9200

                I really dig both the Ultimak's and Addax's custom scope rail. Ultimaks are great but expensive. Addax's is similiar to the Kreb's Custom one. It sits over the top cover and attaches to the rear sight and stock tang of the rear trunion.

                Comment

                • #9
                  ar15barrels
                  I need a LIFE!!
                  • Jan 2006
                  • 57198

                  I can tell you that welding a rail to the side of the receiver won't work.
                  I just fixed one last week that was done this way by a big-name builder.
                  The rail ripped off the receiver, leaving a gaping hole of about 1/4" x 3/8" and some gnarly looking welds.
                  I welded up the hole and ground off all the excess welds that were left, being careful to stay away from the other holes in the receiver so as not to effect the heat treating.
                  Randall Rausch

                  AR work: www.ar15barrels.com
                  Handguns: www.handgunbarrels.com
                  Bolt actions: www.700barrels.com
                  Foreign Semi Autos: www.akbarrels.com
                  Most work done while you wait on a scheduled shop visit.

                  Comment

                  • #10
                    M. Sage
                    Moderator Emeritus
                    CGN Contributor - Lifetime
                    • Jul 2006
                    • 19759

                    Sounds like they set their MIG too hot...
                    Originally posted by Deadbolt
                    "We're here to take your land for your safety"

                    "My Safety?" *click* "There, that was my safety"
                    sigpicNRA Member

                    Comment

                    • #11
                      M I K
                      Junior Member
                      • Dec 2007
                      • 99

                      I went out shooting with a friend of mine who brought his AK along. He ran a couple 30 round magazines through it without delay. I reached up and felt the temperature of his gas tube wondering if it would be a good location for a mount such as an Ultimak. NO THANK YOU.

                      The Russians figured out the best place to mount a scope on an AK a long time ago. There are a few different mounts on the market for an AK. But compared to the side rail, they are all lacking. And you don't need rivets or a gunsmith to do a great job of mounting a quality rail to a stamped receiver. I recently mounted the MPK2 system from Tantal on an NDS-3.


                      It mounts with quality Allen head machine screws from the inside. The instructions and template for it are thorough and spot on. It turned out perfect. The rail is quality, solid, perfectly located, and it didn't take long to do. The Russian built low mount with a Weaver rail that Tantal has is a quality piece, and the return to zero is absolute every time. It is an ideal platform for a Scope, Red Dot, or NV.

                      Doug at Tantal is a great guy to work with. And NO, I don't work for them.

                      JMHO
                      Last edited by M I K; 10-15-2008, 9:58 AM.
                      sigpic
                      Semper Paratus

                      Comment

                      • #12
                        motorhead
                        Veteran Member
                        • Jan 2008
                        • 3409

                        beryl type mount is very solid. won't interchange with your other mounts though. there is a rail that screws on from the i/s, only requires drilling.
                        sigpic Sic gorgiamus allos subjectatos nunc

                        Comment

                        • #13
                          ar15barrels
                          I need a LIFE!!
                          • Jan 2006
                          • 57198

                          Originally posted by motorhead
                          beryl type mount is very solid. won't interchange with your other mounts though. there is a rail that screws on from the i/s, only requires drilling.
                          I put one of these on for a guy last week.
                          With the reciever clamped in the mill and using the dimensions provided in the instructions, it was quite easy to locate and drill the holes via the DRO.
                          I even drilled them a few thousandths smaller than recommended and tightened up the fit of the screws to the reciever.

                          The rail ended up perfectly parallel to the top of the receiver rails.
                          Randall Rausch

                          AR work: www.ar15barrels.com
                          Handguns: www.handgunbarrels.com
                          Bolt actions: www.700barrels.com
                          Foreign Semi Autos: www.akbarrels.com
                          Most work done while you wait on a scheduled shop visit.

                          Comment

                          • #14
                            motorhead
                            Veteran Member
                            • Jan 2008
                            • 3409

                            ar, which mount did he use?
                            sigpic Sic gorgiamus allos subjectatos nunc

                            Comment

                            • #15
                              ar15barrels
                              I need a LIFE!!
                              • Jan 2006
                              • 57198

                              Originally posted by motorhead
                              ar, which mount did he use?
                              To the best of my memory, it was from this company:

                              Dedicated to Kalashnikov AK-74 small calibre assault rifle systems, Collector's Source provides hard to find data and images of all versions of European AK-74, AKS-74, AKS-74U "Krinkov," RPK-74, and others, including accessories and rare parts locator services.. Find it all at the Zone.


                              It was this type of rail that I installed:

                              Last edited by ar15barrels; 10-20-2008, 1:52 PM.
                              Randall Rausch

                              AR work: www.ar15barrels.com
                              Handguns: www.handgunbarrels.com
                              Bolt actions: www.700barrels.com
                              Foreign Semi Autos: www.akbarrels.com
                              Most work done while you wait on a scheduled shop visit.

                              Comment

                              Working...
                              UA-8071174-1