HELP: Glock magazine

[viet4lifeOC]

I had to qualify for my CCW permit last night.

On my Glock 19 gen 4 one of the magazine's follower chipped off. And one magazine had several failure to feed on the last round. I bought this gun from a Calgun member. Great seller for a gun I wanted for a reasonable price. The gun came with 3 x 10 round magazines. I assume these weren't the originals.

So the CCW instructor thinks I should replace the spring in one the magazine and the follower on the other.

Are there specific magazine followers and magazine spring I need to buy? Or do I just buy a glock 10 round magazine follower and 10 round magazine spring?
Provide links will be helpful.

Thank you.

[stitchnicklas]

http://www.midwayusa.com/product/758644/glock-magazine-spring-glock-19-23-26-27-29-30-32-33-38-39

http://www.midwayusa.com/product/498539/glock-magazine-follower-glock-17-19-26-34-9mm-luger-10-round-polymer-black

you need the glock mag tool also

http://www.midwayusa.com/product/398234/gtul-glock-magazine-disassembly-tool-9mm-40-polymer-red

i have one you could use if you come to riverside

[viet4lifeOC]

http://www.midwayusa.com/product/758...30-32-33-38-39

http://www.midwayusa.com/product/498539/glock-magazine-follower-glock-17-19-26-34-9mm-luger-10-round-polymer-black

you need the glock mag tool also

http://www.midwayusa.com/product/398234/gtul-glock-magazine-disassembly-tool-9mm-40-polymer-red

i have one you could use if you come to riverside

Thanks for the link. I just wanted to make sure.

And thank you for the kind offer, but luckily I bought the mag tool months ago.

[viet4lifeOC]

This is what I was worried about.

The follower has two reviews with 1 star (out of 5). Complaints us it does not feed consistently.

Also, the magazine spring you link...do I need to buy a magazine spring specifically for a 10 round magazine. Or it's one magazine spring produce by glock that fits both standard capacity and 10 round magazines?

[viet4lifeOC]

Here are glock 9mm 10 round follower http://glockparts.com/Detail.aspx?PROD=7196&CAT=726

They also have #3 and #6 followers? What do the numbers mean?

Also, glock 10 around magazine spring http://glockparts.com/Detail.aspx?PROD=7196
They don't specify if it's for gen3, gen4, or both gens.

[like2angle]

The numbers on the followers define the caliber, capacity and Gen 1-3 or Gen 4. The only difference on the Gen 4 mags is that they support the ambidextrous mag release on Gen 4 pistols.

I use my Glock armorers tool to disassemble the magazines, its pretty easy and there are lots of You tube videos. Check ebay for lowest parts prices.