Uzi Micro build question

[othersmightlive]

Quick questions to anyone who has built or owns a micro (pistol) uzi: Does it have a feed ramp? If so, will a regular weldment kit work for it? Thanks in advance for educated answers

[Centaine]

Does it have a feed ramp? If so, will a regular weldment kit work for it? Thanks in advance for educated answers

Yes they have a feedramp, same as a fullsize semi-auto feedramp but may need a little trimming to match the wall thickness of the smaller micro receiver.

Pictured is 3 styles of uzi feedramps.



The one on the far left is a full size uzi semi-auto feedramp, notice the ring around it. The ring is in place to prevent the use of an open bolt smg bolt. However this ring/feedramp is the same for the micro and will work for both the closed bolt semi auto and closed bolt smg configurations in a micro because the micro closed bolt clears the feedramp/ring. Most of the micro torch cut kits available on the market are missing the feedramp but yes you could use one from a fullsize uzi weldment kit.

Middle pic is a modified fullsize uzi feedramp that allows the use of open or closed bolt configurations.

Far right pic is what a fullsize smg feedramp looks like.

[othersmightlive]

Awesome, thanks!